{"title":"Cadillac Parts","description":"\u003cp\u003e3D-printable replacement parts, clips, trims and accessories that fit Cadillac vehicles. Browse our Cadillac catalogue and request any part to be made for you.\u003c\/p\u003e","products":[{"product_id":"sail-panel-bracket-2004-cadillac-cts-v","title":"Sail Panel Bracket – 2004 Cadillac Cts-v","description":"\u003cp\u003eThe 2004 Cadillac CTS-V Sail Panel (the interior cover for the C pillar) has an internal plastic bracket screwed to a retainer in the C pillar but the bracket deteriorates with age.  The access hole for the screw has a small plastic clip on cover that says \"Air Bag\".  When the internal bracket cracks, the sail panel separates from the body and becomes loose.  \u003cbr\u003e\u003cbr\u003eIf enough of the internal bracket remains, this may be repaired with a washer attached to the remaining bracket and replacement #8 x 1\/2 inch screw.  The retainer this screws into is not actually threaded.  \u003cbr\u003e\u003cbr\u003eIf not enough of the internal bracket remains, this thing can be used to replace both the internal bracket and the clip on cover that says \"Air Bag\".\u003cbr\u003e\u003cbr\u003eRequirements:\u003cbr\u003eMetal screws in size #8 x 1\/2 inch with a 7mm hex washer slotted head\u003cbr\u003e7mm hex bit driver\u003cbr\u003eBarbecue skewers\u003cbr\u003e\u003cbr\u003eAfter removing the clip on covers, I snapped off the remaining cracked plastic on the end of the internal bracket, then inserted the printed bracket through the access hole and used a barbecue skewer to align it with the retainer while pressing the sail panel against the C pillar.  Then I removed the skewer and used a printed bit driver extension with 7mm hex bit driver to insert and tighten the screw lightly.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2004 Cadillac Cts-v\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePart details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMake: Cadillac\u003c\/li\u003e\n\u003cli\u003eModel: CTS-V\u003c\/li\u003e\n\u003cli\u003eYear: 2004\u003c\/li\u003e\n\u003cli\u003eDesign files: 2\u003c\/li\u003e\n\u003cli\u003eProduction: 3D printed to order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrint settings\u003c\/h3\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch3\u003eCatalogue item\u003c\/h3\u003e\u003cp\u003eThis part is listed in our catalogue for reference. Want it made? \u003ca href=\"\/pages\/contact\"\u003eSend us a request\u003c\/a\u003e with your vehicle details.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3757125\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68015677505768,"sku":"CAT-f57385df","price":0.0,"currency_code":"TND","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/sail-panel-bracket-1_1778408660486_w6d3ug.jpg?v=1793140999"},{"product_id":"hazard-emergency-flasher-switch-button-1994-1999-cadillac-deville-seville-eldorado","title":"Hazard Emergency Flasher Switch Button – 1994-1999 Cadillac Deville \/ Seville \/ Eldorado","description":"\u003cp\u003eI inherited a Cadillac Eldorado and the insert for the hazard flasher knob \/ button was gone.  I found a few examples on ebay and mocked up a few prototypes.  The Eldorado has a much larger outer knob than other GM vehicles of the time had for the hazard button; others have a simple set of nested cylindrical buttons.\u003cbr\u003e\u003cbr\u003e16 mm outer diameter, whether you need a washer for the spring or not will depend on what springs you can source.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1994-1999 Cadillac Deville \/ Seville \/ Eldorado\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePart details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMake: Cadillac\u003c\/li\u003e\n\u003cli\u003eModel: DeVille\u003c\/li\u003e\n\u003cli\u003eYear: 1994\u003c\/li\u003e\n\u003cli\u003eDesign files: 1\u003c\/li\u003e\n\u003cli\u003eProduction: 3D printed to order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrint settings\u003c\/h3\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch3\u003eCatalogue item\u003c\/h3\u003e\u003cp\u003eThis part is listed in our catalogue for reference. Want it made? \u003ca href=\"\/pages\/contact\"\u003eSend us a request\u003c\/a\u003e with your vehicle details.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5645552\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68015678062824,"sku":"CAT-0263283f","price":0.0,"currency_code":"TND","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/hazard-emergency-flasher-switch-button-1_1783492543656_3e7c7e.jpg?v=1793141000"},{"product_id":"clock-gear-1974-1978-cadillac-eldorado","title":"Clock Gear – 1974-1978 Cadillac Eldorado","description":"\u003cp\u003eReplacement model for the brown gear found in these year clocks that always are missing\u003cbr\u003eResin print is basically required for this small scale and i recommend using a small amount of silicone to attack the gear, or else it can slip\u003cbr\u003e\u003cbr\u003eREVISED\u003cbr\u003eSo the original designed gear was slightly too big and had a problem where over the course of a few weeks the clock will stop working because the gear would build up friction against the edges and stall. This happened because in order for the gear to sit in properly it needed to be put in pretty loose. I thought this was normal and a result of how the clock was designed but NOPE. The issue is solved but this slightly smaller version of the gear which allows it to be tightened all of the way. Allowing the gear to sit solidly inside the clock with now irregular movements\u003cbr\u003e\u003cbr\u003eSCALE\u003cbr\u003escale the gear to 50% of its size in whichever slicer you put it in. The gear should measure about 6 mm total width when scaled to 50%\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1974-1978 Cadillac Eldorado\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePart details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMake: Cadillac\u003c\/li\u003e\n\u003cli\u003eModel: Eldorado\u003c\/li\u003e\n\u003cli\u003eYear: 1974\u003c\/li\u003e\n\u003cli\u003eDesign files: 1\u003c\/li\u003e\n\u003cli\u003eProduction: 3D printed to order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrint settings\u003c\/h3\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch3\u003eCatalogue item\u003c\/h3\u003e\u003cp\u003eThis part is listed in our catalogue for reference. Want it made? \u003ca href=\"\/pages\/contact\"\u003eSend us a request\u003c\/a\u003e with your vehicle details.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6974519\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68015678652648,"sku":"CAT-43b87a77","price":0.0,"currency_code":"TND","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/clock-gear-1_1778152299847_2rkwjt.jpg?v=1793141001"},{"product_id":"cruise-control-switch-lever-1974-1979-cadillac-eldorado","title":"Cruise Control Switch Lever – 1974-1979 Cadillac Eldorado","description":"\u003cp\u003eCruise control switch repair for 1974-1979 Cadillac. May fit other switches in 1970s Cadillacs. Maybe even up into the 80s. If your cruise control switch feels all soft and mushy, and doesn't work, it's probably the chrome plated plastic lever that is broken. I also have the switch housing, in case yours is broken.\u003cbr\u003e\u003cbr\u003eYou will need to reuse all the other internal components of the switch. Be careful not to lose the tiny spring in the lever. The bores in the lever for the spring-loaded detent thingy may need to be cleaned up, for the thingy to move up and down freely.\u003cbr\u003e\u003cbr\u003eI made this for a friend, I do most of the repairs to his 1976 Cadillac Eldorado.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1974-1979 Cadillac Eldorado\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePart details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMake: Cadillac\u003c\/li\u003e\n\u003cli\u003eModel: Eldorado\u003c\/li\u003e\n\u003cli\u003eYear: 1974\u003c\/li\u003e\n\u003cli\u003eDesign files: 2\u003c\/li\u003e\n\u003cli\u003eProduction: 3D printed to order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrint settings\u003c\/h3\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch3\u003eCatalogue item\u003c\/h3\u003e\u003cp\u003eThis part is listed in our catalogue for reference. Want it made? \u003ca href=\"\/pages\/contact\"\u003eSend us a request\u003c\/a\u003e with your vehicle details.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5907459\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68015679242472,"sku":"CAT-c0549bef","price":0.0,"currency_code":"TND","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/cruise-control-switch-lever-1_1783515692050_mnd5tg.jpg?v=1793141002"},{"product_id":"vent-register-repair-kit-1974-1978-cadillac-eldorado","title":"Vent Register Repair Kit – 1974-1978 Cadillac Eldorado","description":"\u003cp\u003eVent repair kit, not an entire vent register replacement, for a 1976 Cadillac Eldorado. Should fit any Cadillac from about 1974 to 1978. For vents that are 5-5\/8\" wide. Broke one of the pin tabs removing or installing the vent? This is for you. You will need to reuse the original chrome part, the moveable flaps, and the connecting rod for the flaps. Made this for my friend's car.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1974-1978 Cadillac Eldorado\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePart details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMake: Cadillac\u003c\/li\u003e\n\u003cli\u003eModel: Eldorado\u003c\/li\u003e\n\u003cli\u003eYear: 1974\u003c\/li\u003e\n\u003cli\u003eDesign files: 3\u003c\/li\u003e\n\u003cli\u003eProduction: 3D printed to order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrint settings\u003c\/h3\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch3\u003eCatalogue item\u003c\/h3\u003e\u003cp\u003eThis part is listed in our catalogue for reference. Want it made? \u003ca href=\"\/pages\/contact\"\u003eSend us a request\u003c\/a\u003e with your vehicle details.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6010187\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68015679799528,"sku":"CAT-cff8a453","price":0.0,"currency_code":"TND","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/vent-register-repair-kit-1_1778152294446_lb5uz5.jpg?v=1793141002"}],"url":"https:\/\/partsremade.com\/collections\/cadillac-parts.oembed","provider":"My Store","version":"1.0","type":"link"}