{"title":"Ford Ranger Parts","description":"\u003cp\u003e75 3D-printable replacement parts for the Ford Ranger (1982–2025 models), including cup holder insert, ignition bezel, ball bunjee mount and bonnet guard brackets. Every part is printed to order to replace broken, worn or discontinued originals.\u003c\/p\u003e\u003cp\u003eCan't find your part? \u003ca href=\"\/pages\/contact\"\u003eRequest it\u003c\/a\u003e. See all \u003ca href=\"\/collections\/ford-parts\"\u003eFord parts\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"6x8-to-6-5-speaker-adapter-1982-ford-ranger","title":"6x8 To 6 5 Speaker Adapter – 1982 Ford Ranger","description":"\u003cp\u003e3D printable 6x8 to 6 5 speaker adapter for the 1982 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eMade this for my Ford Ranger to run 6.5'' speakers. Should work for any 6x8 enclosure.\u003cbr\u003e\u003cbr\u003eEdit 6\/24\/23\u003cbr\u003e\u003cbr\u003eI added a second version that has holes for M3 bolts if you don't want to drill them.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1982 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003e6x8 To 6 5 Speaker Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-2269f9e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6073658\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016169025768,"sku":"CAT-2269f9e6","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/6x8-to-6-5-speaker-adapter-1_1783496412341_lrtkh8.jpg?v=1793142599"},{"product_id":"aircon-temperature-knob-insert-1982-ford-ranger","title":"Aircon Temperature Knob Insert – 1982 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing aircon temperature knob insert on your 1982 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eNo description provided.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1982 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eAircon Temperature Knob Insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-00181491\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3862885\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016169189608,"sku":"CAT-00181491","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/aircon-temperature-knob-insert-1_1783516441059_q89uti.jpg?v=1793142601"},{"product_id":"ball-bunjee-mount-1982-ford-ranger-extended-cab","title":"Ball Bunjee Mount – 1982 Ford Ranger (Extended Cab)","description":"\u003cp\u003eReplace a broken or missing ball bunjee mount on your 1982 Ford Ranger (Extended Cab) with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eMount for making ball bunjees into essentially hooks. I use multiple of these in the extended cab of my Ford Ranger to hold anything from backpacks to jackets. Can be used anywhere though, this is just how I utilize it. \u003cbr\u003e\u003cbr\u003eDepending on the size of ball bunjee you may need to print taller (Z axis)\u003cbr\u003e\u003cbr\u003eAlso have common sense please, its just PLA it's not gonna hold a crock pot from taking off your head in a collision.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1982 Ford Ranger (Extended Cab)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eBall Bunjee Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-92190cb5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5366978\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016169550056,"sku":"CAT-92190cb5","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/ball-bunjee-mount-1_1783516448845_7es6zp.jpg?v=1793142602"},{"product_id":"blend-door-repair-hole-patch-1982-ford-ranger","title":"Blend Door Repair (hole Patch) – 1982 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing blend door repair (hole patch) on your 1982 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eAnyone who has an older Ford Ranger most likely has come across a broken blend door.. in order to fix it the quick and easy way (and I use that term very loosely), you'll need to cut a large hole in the bottom of your air box to access it. \u003cbr\u003eThe common technique for patching this giant hole is to slap the cutout back in and tape the hell out of it with some aluminum tape. (see pic...janky)\u003cbr\u003e\u003cbr\u003eThis is where this patch comes in- as you'll see, just print this bad boy off, it's already at the exact size it needs to be. Roughly 3mm thick. Glue it in place with flex seal or something similar. I used a landscaping spike designed by sclem to prop it in place while the glue dries. \u003cbr\u003eLink here: https:\/\/www.printables.com\/model\/438967-landscaping-spike\u003cbr\u003e\u003cbr\u003ePS- please disregard the extraneous stuff that makes it square. that shouldn't print. i'm not a designer.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1982 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eBlend Door Repair (hole Patch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-183ac381\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6875807\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016169648360,"sku":"CAT-183ac381","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/blend-door-repair-hole-patch-1_1783496320458_u26vco.jpg?v=1793142602"},{"product_id":"bonnet-guard-brackets-1982-ford-ranger","title":"Bonnet Guard Brackets – 1982 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing bonnet guard brackets on your 1982 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eBonnet Protector Guards are usually supplied with metal clips that clip onto the front part of your bonnet.  Over time it's likely the metal clips will rust out and cause rust marks on your bonnet, or at worst any movement will scratch your paint (like the cheap arse metal clips that came with the bonnet guard that I bought. The picture of the side bracket shows some of the scratches and rust that the metal brackets caused)  These bonnet protector mounting brackets being plastic should greatly minimize this problem. Photo added showing the front clip in metal vs plastic replacement as a comparison.\u003cbr\u003e\u003cbr\u003eSo far I have found the plastic clips are actually a stronger and firmer fit (as well as doing far less damage to your paint work than the metal clips). The plastic washers that fit on the metal clips (if supplied) should not be required.\u003cbr\u003e\u003cbr\u003eThese are designed for a bonnet guard for a Ford Ranger, although may fit other makes and models. I needed 3 x front brackets and 2 x side brackets for mine. Use fixings (screws) that come with the bonnet protector (although again type and size may vary with brand, so suggest printing one out first and try it for fitment. Requires 5 x M5 10-12mm (stainless) round head bolts)  If you need them to be adjusted for your vehicle, post a comment I'll see what I can do.\u003cbr\u003e\u003cbr\u003eIf you like it, click Like! If you make it, post your Make! If you have a problem with it, post a Comment and I will try and fix it!\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1982 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eBonnet Guard Brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e4 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-9a3c5f80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4436939\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016169877736,"sku":"CAT-9a3c5f80","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/bonnet-guard-brackets-1_1783516456483_q7q6h5.jpg?v=1793142603"},{"product_id":"bracket-for-keko-sail-cover-for-a-1982-ford-ranger","title":"Bracket For Keko Sail Cover For A – 1982 Ford Ranger","description":"\u003cp\u003e3D printable bracket for keko sail cover for a for the 1982 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eA replacement bracket for a \"Keko\" sail cover for a Ford Ranger.\u003cbr\u003e\u003cbr\u003ePrinting:\u003cbr\u003e\u003cbr\u003ePrint on it's side with support.  I used 80% infill - but 20% or more should be sufficient.\u003cbr\u003ePrint in filament that can withstand the elements.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1982 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eBracket For Keko Sail Cover For A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-5567ccb3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016170008808,"sku":"CAT-5567ccb3","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/bracket-for-keko-sail-cover-for-a-1_1783496265058_g0n8cz.jpg?v=1793142604"},{"product_id":"console-tray-1982-ford-ranger","title":"Console Tray – 1982 Ford Ranger","description":"\u003cp\u003e3D printable replacement console tray made for the 1982 Ford Ranger: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eConsole tray for late model Ford Ranger.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1982 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eConsole Tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-f9087293\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6522058\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016170238184,"sku":"CAT-f9087293","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/console-tray-1_1783516437405_ejey0m.jpg?v=1793142605"},{"product_id":"door-keyhole-plug-1982-ford-ranger","title":"Door Keyhole Plug – 1982 Ford Ranger","description":"\u003cp\u003eNeed a replacement door keyhole plug for your 1982 Ford Ranger? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eDesigned for my Ford Ranger where I have deleted the key mechanism and simply installed this as a \"delete\" (i hate that term). It is intended to have a thin water sealing gasket of about 1-1.5mm thickness (closed cell material).\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1982 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDoor Keyhole Plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-295b3b74\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:2644512\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016170467560,"sku":"CAT-295b3b74","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/door-keyhole-plug-1_1783496463100_tvypuo.jpg?v=1793142606"},{"product_id":"double-din-to-single-din-remix-1982-ford-ranger","title":"Double Din To Single Din (remix) – 1982 Ford Ranger","description":"\u003cp\u003e3D printable replacement double din to single din (remix) made for the 1982 Ford Ranger: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eRebuilt to increase all wall thickness to 1\/16\" (1.6mm).  I'm working on a version which has the back cut out, so that you can print it vertical without a lot of support material; and then have a separate backing piece that you would glue in (print time difference is 5 hr vs. 10 hrs).\u003cbr\u003e\u003cbr\u003eUpdate 1 (10\/10\/2019): v102 is the full model with back cover.  v104 is the open back, and the corresponding cover (glue in place).\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1982 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDouble Din To Single Din (remix)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e3 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-0b5761ba\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3897970\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016170598632,"sku":"CAT-0b5761ba","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/double-din-to-single-din-remix-1_1783496346701_ixsglx.jpg?v=1793142607"},{"product_id":"truck-canopy-door-lever-bracket-1982-ford-ranger","title":"Truck Canopy Door Lever Bracket – 1982 Ford Ranger","description":"\u003cp\u003eNeed a replacement truck canopy door lever bracket for your 1982 Ford Ranger? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eRod alignment bracket for Truckman canopy door (Ford Ranger)\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1982 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eTruck Canopy Door Lever Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-1798154c\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4682438\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016170696936,"sku":"CAT-1798154c","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/truck-canopy-door-lever-bracket-1_1783496450679_5x7qq5.jpg?v=1793142608"},{"product_id":"door-handle-mounting-reinforcement-bushing-1983-1988-ford-ranger","title":"Door Handle Mounting Reinforcement Bushing – 1983-1988 Ford Ranger","description":"\u003cp\u003eNeed a replacement door handle mounting reinforcement bushing for your 1983-1988 Ford Ranger? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a part that allows you to repair first generation ranger door handles, which are notorious for breaking at the forward mounting screw. as junkyard replacements get more and more scarce, this part will allow you to fix broken handles or reinforce unbroken ones.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1983-1988 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDoor Handle Mounting Reinforcement Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1983\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-86a56414\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4764055\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016170762472,"sku":"CAT-86a56414","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/door-handle-mounting-reinforcement-bushing-1_1783496407469_kzmewg.jpg?v=1793142609"},{"product_id":"radiator-overflow-drain-hose-clip-1983-2011-ford-ranger","title":"Radiator Overflow Drain Hose Clip – 1983-2011 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing radiator overflow drain hose clip on your 1983-2011 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis clip is used along the top of the radiator of some Ford vehicles such as the Ranger. It is intended to hold the radiator overflow hose in place in the channel.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1983-2011 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eRadiator Overflow Drain Hose Clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1983\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-a3c035de\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:2695453\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016170860776,"sku":"CAT-a3c035de","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/radiator-overflow-drain-hose-clip-1_1783514999440_nbx6b6.jpg?v=1793142610"},{"product_id":"swingaway-mirror-pivot-socket-1983-1992-ford-ranger","title":"Swingaway Mirror Pivot Socket – 1983-1992 Ford Ranger","description":"\u003cp\u003e3D printable replacement swingaway mirror pivot socket made for the 1983-1992 Ford Ranger: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eInside of the Swingaway Mirror used on the 83-92 Ford Ranger, there is a plastic socket in a ball-and-socket assembly which provides the tension to hold the mirror in position. This plastic socket can crack apart, and when it does, the mirror will not stay in position. This plastic part is not available and no commonly available part can replace it, hence these 3D parts.\u003cbr\u003e\u003cbr\u003eThis part is likely shared, or similar to the part used in mirrors on other Ford vehicles with similar design mirrors, such as some F-series, E-series, Aerostar, and Bronco II (which itself uses the exact same mirrors as the Ranger).\u003cbr\u003e\u003cbr\u003eNote that there are other potential failures so you must take the mirror apart to identify the problem before assuming this will solve it.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1983-1992 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSwingaway Mirror Pivot Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1983\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-bc3fa56b\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6413568\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016170926312,"sku":"CAT-bc3fa56b","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/swingaway-mirror-pivot-socket-1_1778347591559_gcsye0.jpg?v=1793142610"},{"product_id":"single-din-radio-install-insert-1987-ford-ranger","title":"Single Din Radio Install Insert – 1987 Ford Ranger","description":"\u003cp\u003e3D printable single din radio install insert for the 1987 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eI needed a way to securely install a single DIN pioneer radio in my 1987 ford ranger since the original radio was missing. It will fit on the ender 3 bed if you put it horizontal with no skirt, raft or brim. it is designed specially for my truck, but may have other uses.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1987 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSingle Din Radio Install Insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1987\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-e659d67f\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4264790\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016170991848,"sku":"CAT-e659d67f","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/single-din-radio-install-insert-1_1778157784833_ohchqv.jpg?v=1793142611"},{"product_id":"armrest-bracket-1992-ford-ranger","title":"Armrest Bracket – 1992 Ford Ranger","description":"\u003cp\u003eNeed a replacement armrest bracket for your 1992 Ford Ranger? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003earmrest fix for a 1992 or same model ford ranger\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1992 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eArmrest Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1992\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-71b76950\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6817680\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016171090152,"sku":"CAT-71b76950","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/armrest-bracket-1_1783492679563_x9dg58.jpg?v=1793142613"},{"product_id":"cup-holder-insert-1993-1997-ford-ranger-2nd-gen","title":"Cup Holder Insert – 1993-1997 Ford Ranger 2nd Gen","description":"\u003cp\u003e3D printable replacement cup holder insert made for the 1993-1997 Ford Ranger 2nd Gen: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eOEM cup holders suck! This lightly press-fits in and will actually hold your cups. \u003cbr\u003eInner diameter: 3\"\u003cbr\u003eOutside diameter: 3.352\"\u003cbr\u003eHeight: 2.5\"\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1993-1997 Ford Ranger 2nd Gen\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCup Holder Insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (3MF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-c959e073\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7007996\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016171188456,"sku":"CAT-c959e073","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/cup-holder-insert-1_1778157750677_7912ye.jpg?v=1793142613"},{"product_id":"fan-speed-control-knob-1993-ford-ranger","title":"Fan Speed Control Knob – 1993 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing fan speed control knob on your 1993 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis was designed from my broken 1993 ford ranger fan speed knob. its not a perfect design but it works perfect.It is a petty snug fit and has to be pressed in and if you want to remove you will need pliers or you could scale up in your slicer by 1 or 2 percent. Prints faster with tree supports and part standing up.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1993 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eFan Speed Control Knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-99629e6f\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4835847\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016171253992,"sku":"CAT-99629e6f","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/fan-speed-control-knob-1_1778157773502_160vej.jpg?v=1793142614"},{"product_id":"hood-release-handle-1993-1997-ford-ranger-2nd-gen","title":"Hood Release Handle – 1993-1997 Ford Ranger 2nd Gen","description":"\u003cp\u003e3D printable replacement hood release handle made for the 1993-1997 Ford Ranger 2nd Gen: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThe hood release handle for a 2nd generation ford ranger (1993 to 1997) \u003cbr\u003e\u003cbr\u003eThis will likely work for 1st gen (1982-1992, maybe even 3rd gen (1998-2012) I just haven't checked.\u003cbr\u003e\u003cbr\u003eHighly recommend printing horizontally with the flat face on buildplate for maximum pull strength with at least 50% infill with 1.5mm walls.\u003cbr\u003e\u003cbr\u003eIt has been in use in my buddy's truck for a couple months so far without problem, so thought I'd share\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1993-1997 Ford Ranger 2nd Gen\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eHood Release Handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (OBJ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-5b735c1a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5020639\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016171352296,"sku":"CAT-5b735c1a","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/hood-release-handle-1_1778157777601_h61ncf.jpg?v=1793142616"},{"product_id":"center-console-armrest-latch-1994-2004-ford-ranger","title":"Center Console Armrest Latch – 1994-2004 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing center console armrest latch on your 1994-2004 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis a replacement center console latch for the Ford Ranger (1994-2004 only). No modifications needed to fit.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1994-2004 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCenter Console Armrest Latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1994\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-d2fc21ba\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6782809\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016171450600,"sku":"CAT-d2fc21ba","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/center-console-armrest-latch-1_1778157694390_vsbnxq.jpg?v=1793142616"},{"product_id":"cup-holder-delete-plate-1994-1997-ford-ranger-3rd-gen-manual","title":"Cup Holder Delete Plate – 1994-1997 Ford Ranger 3rd Gen (Manual)","description":"\u003cp\u003e3D printable cup holder delete plate for the 1994-1997 Ford Ranger 3rd Gen (Manual): download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThe cup holders on the 94-97 Rangers are trash anyways so I decided to make a simple plate to delete them.\u003cbr\u003e\u003cbr\u003eThis print reuses the same 4 screws that are removed and keeps them recessed.\u003cbr\u003e\u003cbr\u003eInfill: 30% Gyroid\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1994-1997 Ford Ranger 3rd Gen (Manual)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCup Holder Delete Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1994\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-a1b2296a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7083761\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016171679976,"sku":"CAT-a1b2296a","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/cup-holder-delete-plate-1_1778157713600_s75ip4.jpg?v=1793142618"},{"product_id":"double-din-to-single-din-head-unit-adapter-1995-ford-ranger","title":"Double Din To Single Din Head Unit Adapter – 1995 Ford Ranger","description":"\u003cp\u003e3D printable replacement double din to single din head unit adapter made for the 1995 Ford Ranger: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a double din adapter to single din head unit.\u003cbr\u003e\u003cbr\u003eMy 95 Ford Ranger radio went out so I grabbed one out of my old delivery car, but it was a single din radio.\u003cbr\u003eafter 2 years I finally got tired of the head unit flopping around so I fixed it. \u003cbr\u003eI also needed a new faceplate rim so I made one of those to.\u003cbr\u003e\u003cbr\u003eGLHF\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1995 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDouble Din To Single Din Head Unit Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1995\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e3 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-4ea7a4cd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:2771979\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016171778280,"sku":"CAT-4ea7a4cd","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/double-din-to-single-din-head-unit-adapter-1_1783496456870_kvkeef.jpg?v=1793142619"},{"product_id":"armrest-center-console-latch-1996-ford-ranger","title":"Armrest Center Console Latch – 1996 Ford Ranger","description":"\u003cp\u003eNeed a replacement armrest center console latch for your 1996 Ford Ranger? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThey say necessity is the mother of invention (or re-creation?) and that is exactly why I made this. The arm rest in my 1996 Ford Ranger had a broken latch so the spring loaded center console was always open by default.\u003cbr\u003e\u003cbr\u003e This is a second revision due to the original one I made bending with the summer heat, printed in PLA. I added some ribs to add a backbone and some added strength. The ribs were a little tall so I shaved it down with a razorblade to get a nice tight fit when closed. You may or may not need to do the same to ensure proper fitment.\u003cbr\u003e\u003cbr\u003e I did not find it necessary to use glue of any sort, just disassemble your armrest cover (the screws are hidden below the fabric on the inside) and slip this into the existing hole.\u003cbr\u003e\u003cbr\u003eAs always, if you make one, all I ask is that you please share a photo or at least comment on how it worked for you!\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1996 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eArmrest Center Console Latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-df374410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:2551062\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016172302568,"sku":"CAT-df374410","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/armrest-center-console-latch-1_1778158520288_kws7kb.jpg?v=1793142620"},{"product_id":"door-lock-post-1996-ford-ranger","title":"Door Lock Post – 1996 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing door lock post on your 1996 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThe door lock posts on my 1996 Ford Ranger were broken, making them virtually unusable. I made these to avoid buying replacements (after all, isn't that part of the reason why we have 3d printers?).\u003cbr\u003e\u003cbr\u003eI had to drill and tap these to fit the threads on the door lock rods. I believe the thread size was 10-32.\u003cbr\u003e\u003cbr\u003eAs always, if you make one, all I ask is that you please share a photo or at least comment on how it worked for you!\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1996 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDoor Lock Post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-b1d8fcc7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:2531635\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016172400872,"sku":"CAT-b1d8fcc7","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/door-lock-post-1_1778348546834_rb4li2.jpg?v=1793142621"},{"product_id":"double-din-radio-adapter-bracket-1996-ford-ranger","title":"Double Din Radio Adapter Bracket – 1996 Ford Ranger","description":"\u003cp\u003e3D printable double din radio adapter bracket for the 1996 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eOrdered a Metra install kit to install a double din radio in my 96 Ford Ranger. It set the radio to far back in the dash for my liking so I drew my own to place it where I wanted it to sit.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1996 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDouble Din Radio Adapter Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-c4dcba53\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4730888\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016172499176,"sku":"CAT-c4dcba53","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/double-din-radio-adapter-bracket-1_1778157764357_p3zjqm.jpg?v=1793142622"},{"product_id":"window-crank-knob-1996-ford-ranger","title":"Window Crank Knob – 1996 Ford Ranger","description":"\u003cp\u003e3D printable window crank knob for the 1996 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThe window crank on my 1996 Ford Ranger was missing the knob so I tried to copy the original one from the passenger side and this is what I came up with. It works great! Saved me $15 from having to buy an aftermarket replacement. This may fit other Fords with a manual window crank as well.\u003cbr\u003e\u003cbr\u003eTo install, slip onto the handle, then heat up and \"mushroom\" over the post from the backside, essentially \"riveting\" it into place whilst allowing it to rotate freely.\u003cbr\u003e\u003cbr\u003eAs always, if you make one, all I ask is that you please share a photo or at least comment on how it worked for you!\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1996 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eWindow Crank Knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-51d73aef\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:2531631\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016172597480,"sku":"CAT-51d73aef","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/window-crank-knob-1_1778373027280_7xh0gi.jpg?v=1793142622"},{"product_id":"front-speaker-adapter-1997-ford-ranger","title":"Front Speaker Adapter – 1997 Ford Ranger","description":"\u003cp\u003e3D printable replacement front speaker adapter made for the 1997 Ford Ranger: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eNeeded to quickly adapt 6.5 aftermarket speakers that I had to a front 6.8 speaker grill and hole in my 97 Ford Ranger. Speaker is countersunk and I put a notch in the speaker where the oem screw goes in, fits nice raises and the speaker out abit to clear the hole width, door panel fits nice still.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1997 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eFront Speaker Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1997\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-4e5f71c3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6538693\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016172859624,"sku":"CAT-4e5f71c3","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/front-speaker-adapter-1_1778347578155_xiqucm.jpg?v=1793142624"},{"product_id":"kick-panel-retainer-fastener-clip-1997-ford-ranger","title":"Kick Panel Retainer Fastener Clip – 1997 Ford Ranger","description":"\u003cp\u003eNeed a replacement kick panel retainer fastener clip for your 1997 Ford Ranger? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis replaces Ford Part Number N806363-S. You might have to resize to your application.\u003cbr\u003e\u003cbr\u003eRedoing the headliner on my '97 Ford Ranger, several panel clips broke. These were particularly problematic, and trips to the junkyard resulted in more broken clips. \u003cbr\u003e\u003cbr\u003eI originally tried to remake the part exactly as OEM, but it was difficult to print, too thin, and too fragile. I made this part to be easier to print and thicker in certain places to add strength.\u003cbr\u003e\u003cbr\u003eI printed on its side in .12 resolution and 25% infill with supports. I recommend printing in PETG or ABS or Nylon if you can (the original part is nylon).\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1997 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eKick Panel Retainer Fastener Clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1997\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-cfbfb09c\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4625846\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016173023464,"sku":"CAT-cfbfb09c","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/kick-panel-retainer-fastener-clip-1_1778314654597_rswvn5.jpg?v=1793142625"},{"product_id":"rear-speaker-adapter-6x8-to-6-5-1997-ford-ranger-reg-cab","title":"Rear Speaker Adapter 6x8 To 6.5 – 1997 Ford Ranger (Reg Cab)","description":"\u003cp\u003eNeed a replacement rear speaker adapter 6x8 to 6.5 for your 1997 Ford Ranger (Reg Cab)? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eQuick Simple 6x8 to 6.5 Rear Speaker adapter for my 97 Ranger Reg Cab, Many Others Cars as well just make sure you look first.\u003cbr\u003e2 needed, this also offsets the speaker higher or lower in the grill, centered not needed.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1997 Ford Ranger (Reg Cab)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eRear Speaker Adapter 6x8 To 6.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1997\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-7ea9a4ee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6420202\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016173154536,"sku":"CAT-7ea9a4ee","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/rear-speaker-adapter-6x8-to-65-1_1783496446924_qbosub.jpg?v=1793142626"},{"product_id":"12v-cigarette-lighter-cover-plug-1998-2012-ford-ranger","title":"12v Cigarette Lighter Cover Plug – 1998-2012 Ford Ranger","description":"\u003cp\u003e3D printable 12v cigarette lighter cover plug for the 1998-2012 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eVery small tolerance, but not impossible to remove from the outlet. \u003cbr\u003eIf printed in black filament, it can look pretty flush with the rest of the center panel. \u003cbr\u003eMade to fit on Ford Ranger 98-12.\u003cbr\u003eMade for the left 12V as the right one comes with a plug.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2012 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003e12v Cigarette Lighter Cover Plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-b91be7f3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7304954\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016173383912,"sku":"CAT-b91be7f3","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/12v-cigarette-lighter-cover-plug-1_1778347582003_liuz2u.jpg?v=1793142627"},{"product_id":"bed-anchor-tie-down-cleat-1998-ford-ranger","title":"Bed Anchor \/ Tie-down Cleat – 1998 Ford Ranger","description":"\u003cp\u003e3D printable bed anchor \/ tie-down cleat for the 1998 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a replacement bed anchor\/cleat\/tie-down for a '98 Ford Ranger.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eBed Anchor \/ Tie-down Cleat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-0577e270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:402241\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016173711592,"sku":"CAT-0577e270","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/bed-anchor-tie-down-cleat-1_1777856873511_gz6hi3.jpg?v=1793142628"},{"product_id":"center-console-latch-with-attachment-clips-1998-2011-ford-ranger-3rd-generation","title":"Center Console Latch With Attachment Clips – 1998-2011 Ford Ranger 3rd Generation","description":"\u003cp\u003eNeed a replacement center console latch with attachment clips for your 1998-2011 Ford Ranger 3rd Generation? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eReplaces an easily broken latch thing on certain 3rd Generation Ford Ranger center consoles.\u003cbr\u003e\u003cbr\u003eAdded clips that fit right into the rectangle that mine broke out of.  \u003cbr\u003eThis saves me from using epoxy and having it break in the future, this just clips in and out, but use care, the console itself isnt very durable.\u003cbr\u003e\u003cbr\u003eI would use ABS if I had an appropriate printer, heat may be a concern eventually.\u003cbr\u003e\u003cbr\u003eHopefully this works for you too!\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2011 Ford Ranger 3rd Generation\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCenter Console Latch With Attachment Clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-aa72301a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7042108\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016173940968,"sku":"CAT-aa72301a","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/center-console-latch-with-attachment-clips-1_1778157720527_trvbsh.jpg?v=1793142629"},{"product_id":"dash-vent-cover-1998-2001-ford-ranger","title":"Dash Vent Cover – 1998-2001 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing dash vent cover on your 1998-2001 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eTHIS IS A SMALL VENT COVER FOR THE FORD RANGER, SPECIFICALLY THE 98 TO 01 MODELS. MINE WAS MISSING SO I SPENT SOME TIME TO COVER UP THE UGLY HOLE IN MY DASH!\u003cbr\u003e\u003cbr\u003eHOPE YOU LIKE IT\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2001 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDash Vent Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-7e245f82\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3692318\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016174039272,"sku":"CAT-7e245f82","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/dash-vent-cover-1_1778158535081_iwkwqi.jpg?v=1793142630"},{"product_id":"floor-trim-1998-2002-ford-ranger","title":"Floor Trim – 1998-2002 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing floor trim on your 1998-2002 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eTHIS IS A FLOOR TRIM PIECE MADE FROM ABS FOR THE 98-02 FORD RANGER. PRINTED IN SEPARATE PARTS THEN CHEMICAL WELDED TOGETHER IT SHOULD REPLACE THE TRIM AT THE DOOR ON THE FLOOR OF THE CAB. THE OEM REPLACEMENT FROM A DEALER SHIP IS AROUND $10-$20. IF YOU WANT A DIFFERENT COLORED DOOR WAY OR JUST DON'T WANT TO ORDER THE PART FROM FORD THIS IS THE PART FOR YOU.\u003cbr\u003e\u003cbr\u003eYOU COULD VINYL WRAP IT OR SMOOTH IT. MY FIRST ATTEMPT I TRIED MIMICKING THE LEATHER TEXTURE OEM PARTS HAVE BY SMOOTHING THEN WRAPPING IT IN A PIECE OF FAUX VINYL LEATHER. IT DIDN'T TURN OUT THAT GREAT BUT MAYBE THERE IS SOME TECHNIQUE TO IT.\u003cbr\u003e\u003cbr\u003eANYWAY\u003cbr\u003e\u003cbr\u003eHOPE YOU LIKE IT.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2002 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eFloor Trim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e5 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-33d67ee4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3719536\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016174170344,"sku":"CAT-33d67ee4","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/floor-trim-1_1778157742938_umt2e0.jpg?v=1793142631"},{"product_id":"parking-lamp-retainer-1998-2000-ford-ranger","title":"Parking Lamp Retainer – 1998-2000 Ford Ranger","description":"\u003cp\u003e3D printable parking lamp retainer for the 1998-2000 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a replacement for the plastic socket connector that retains the top stud of the front parking\/turn signal lamp assembly to the headlight panel on 1998 - 2000 North American Ford Rangers.  These plastic connectors become very brittle with age and will probably disintegrate if you have to replace the corner lamps on these trucks.  Without them, it's very hard to get the lamps to fit correctly as the only other retainers are the two screws at the bottom of the assembly. \u003cbr\u003e\u003cbr\u003eEDIT: Thanks to user jj_starr this has been verified to work on an '03 Ford Expedition and may fit other models of Ford cars and trucks within the late '90's\/early 2000's generations. Happy printing!\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2000 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eParking Lamp Retainer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-5e41f326\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3577676\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016174432488,"sku":"CAT-5e41f326","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/parking-lamp-retainer-1_1778314445591_9ii9pk.jpg?v=1793142632"},{"product_id":"removable-cup-holder-1998-2003-ford-ranger-60-40-seats","title":"Removable Cup Holder – 1998-2003 Ford Ranger (60\/40 seats)","description":"\u003cp\u003eReplace a broken or missing removable cup holder on your 1998-2003 Ford Ranger (60\/40 seats) with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a super-niche and specific model. \u003cbr\u003edo you own a 98-03 Ford Ranger with the 60\/40 seats? If so you know the cup holders are not great and are so far they are on a different time zone. I figured that’s something I could solve, so I set off to design a cupholder that would fit specifically in the notch in those 60\/40 seats. \u003cbr\u003eAnd then I thought I could make it even more specific: it fits a 40oz hydro flask because that’s my water bottle. Will it fit others? I've had great success with Trader Joe's 1.25L sparkling water bottles. It fits a Yeti rambler 10oz because that is my favorite coffee cup. Will it fit the 20oz rambler? I don’t know, I don’t have one. If you want to buy me one so I can try. It fits Starbucks paper cups too. And probably other chains.\u003cbr\u003e\u003cbr\u003eAt this point, I had some room left. Giddy with specificity I made a holder for my mini-condiments (I eat my work lunches in the truck you see). It fits a mini-Tabasco and a mini-tajin. Can you use it for other things? Go ahead and put your sharpie, flashlight, pen… whatever in there! Go nuts and send me the pictures. Come to think of it, it probably works pretty well for slim Jim storage.\u003cbr\u003e\u003cbr\u003eI also made an insert to use other cups and bottles when I'm not using the Hydroflask.\u003cbr\u003e\u003cbr\u003eThe profanity? Well, it is a Ford f#%+¥n’ Ranger\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2003 Ford Ranger (60\/40 seats)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eRemovable Cup Holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-161cd3ed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6340771\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016174530792,"sku":"CAT-161cd3ed","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/removable-cup-holder-1_1778158525252_ix2d4u.jpg?v=1793142634"},{"product_id":"steering-wheel-cruise-control-button-delete-panel-1998-2011-ford-ranger-xlt","title":"Steering Wheel Cruise Control Button Delete Panel – 1998-2011 Ford Ranger (XLT)","description":"\u003cp\u003eNeed a replacement steering wheel cruise control button delete panel for your 1998-2011 Ford Ranger (XLT)? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eCruise Control Steering Wheel Button Delete Panels\u003cbr\u003eDesigned based on my 2000 Ford Ranger XLT but should fit any Ford Ranger from the same generation hopefully.\u003cbr\u003e\u003cbr\u003eAfter removing the airbag in the steering wheel, the cruise control button modules can be removed by taking out a couple screws and pulling a couple wires.\u003cbr\u003eThe delete panels should fit in place of the buttons and screw in the same place to cover the hole in the side of the steering wheel.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2011 Ford Ranger (XLT)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSteering Wheel Cruise Control Button Delete Panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-b3e74445\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6918134\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016174694632,"sku":"CAT-b3e74445","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/steering-wheel-cruise-control-button-delete-panel-1_1783516444423_x8pm4q.jpg?v=1793142635"},{"product_id":"center-console-latch-1999-2000-ford-ranger","title":"Center Console Latch – 1999-2000 Ford Ranger","description":"\u003cp\u003eNeed a replacement center console latch for your 1999-2000 Ford Ranger? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a replacement part for the center console of a ford ranger.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1999-2000 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCenter Console Latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-2732a493\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5198046\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016174792936,"sku":"CAT-2732a493","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/center-console-latch-1_1778157757477_qjmyqb.jpg?v=1793142635"},{"product_id":"headlight-clip-2000-ford-ranger","title":"Headlight Clip – 2000 Ford Ranger","description":"\u003cp\u003e3D printable headlight clip for the 2000 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis replaces the headlight clip on a 2000 Ford Ranger (shown above).  I am not sure what the year cutoff date is for the Ranger, but my 2004 Ford Ranger does not have these, but my 2000 Ford Ranger does have these. Super easy to use.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2000 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eHeadlight Clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STEP, STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-888faca8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6244613\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016174858472,"sku":"CAT-888faca8","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/headlight-clip-1_1778049732387_40d1az.jpg?v=1793142637"},{"product_id":"projector-retrofit-cup-2001-2012-ford-ranger","title":"Projector Retrofit Cup – 2001-2012 Ford Ranger","description":"\u003cp\u003e3D printable projector retrofit cup for the 2001-2012 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is designed to fit the plastic headlight housing 01-12 Ford Ranger headlights.\u003cbr\u003eI designed it to use a Morimoto Bixenon H1 V 5.0 projector. (The newer 7.0 should fit fine, the D2S 5.0 may fit but you may have to use amp connector bulbs or D2H bulbs.)\u003cbr\u003e\u003cbr\u003eI do not have any pictures as I have sold the truck but it fits perfect.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eCouple things to keep in mind.\u003cbr\u003e1. Needs to be printed in something high temp and strong. PETG or Nylon is a good choice.\u003cbr\u003e2. I'd do a minimum of 20% infill.\u003cbr\u003e3. Use the retrofit alignment washer along with a 3\" holesaw to cut out the housing to fit the retrofit \"cup\". Make sure the drillbit is straight not crooked) before attempting this. (Glue the washer in where the factory bulb sits)\u003cbr\u003e4. Slide the cup in from the backside and use epoxy resin or similar to get it to attach to the housing. Make sure the cup is not pointing up or down at all and has 3 points of contact with the back of the housing on the lip of the cup. Not doing so will result in you having to tip the headlight way up or down to align the headlights.\u003cbr\u003e5. Once dry, mount the projectors and put both headlights on the truck, make sure the beam pattern is level.\u003cbr\u003e6. Re-seal up the headlights.\u003cbr\u003e7. Enjoy\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2001-2012 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eProjector Retrofit Cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-ea3f5eac\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4070994\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016174956776,"sku":"CAT-ea3f5eac","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/projector-retrofit-cup-1_1778157704715_px7bgb.jpg?v=1793142638"},{"product_id":"tailgate-bushing-2001-ford-ranger","title":"Tailgate Bushing – 2001 Ford Ranger","description":"\u003cp\u003e3D printable tailgate bushing for the 2001 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis was made for a 2001 Ford Ranger.\u003cbr\u003eI printed it at 100% infill in order to maintain strength from the heat and the elements,\u003cbr\u003eyou might be able to get away with printing it a lower infill but you might risk it deforming.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2001 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eTailgate Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-2bce4a8e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7052672\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016175022312,"sku":"CAT-2bce4a8e","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/tailgate-bushing-1_1778157760817_vrlor6.jpg?v=1793142639"},{"product_id":"center-hub-cap-dust-cover-2002-2016-ford-ranger","title":"Center Hub Cap Dust Cover – 2002-2016 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing center hub cap dust cover on your 2002-2016 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003ePrint as is!!! Supports either tree or regular supports is fine but does need supports enabled!\u003cbr\u003e\u003cbr\u003ePrinted with Cura v5.9\u003cbr\u003e\u003cbr\u003eFitment from OEM Ford Part\u003cbr\u003e\u003cbr\u003e2007-2015 EDGE,\u003cbr\u003e2008-2012 ESCAPE,\u003cbr\u003e2002-2016 EXPLORER,\u003cbr\u003e2009-2015 FLEX,\u003cbr\u003e2004-2007 FREESTAR,\u003cbr\u003e2006-2009 FUSION,\u003cbr\u003e2002-2011 RANGER,\u003cbr\u003e2010-2015 TAURUS,\u003cbr\u003e2009-2016 MKS,\u003cbr\u003e2010-2018 MKT,\u003cbr\u003e2010-2017 MKX,\u003cbr\u003e2010-2016 MKZ,\u003cbr\u003e2013-2015 Avalon,\u003cbr\u003e2011-2016 Camry,\u003cbr\u003e2008-2015 Highlander,\u003cbr\u003e2009-2015 Matrix,\u003cbr\u003e2011-2017 Sienna.\u003cbr\u003e\u003cbr\u003ePart number-\u003cbr\u003e\u003cbr\u003eBB53-1A096-RA, 3F23-1A096-DC, 3L24-1A096-AA, 5L24-1A096-AA, 5L2Z-1130-BA, 6F23-1A096-BA, 6L24-1A096-AA, 9L8J-1A096-AA, 9L8Z-1130-A, 8A53-1A096-AB, 8A5Z-1130-C, 42603-07010\u003cbr\u003e\u003cbr\u003eSpecifications-\u003cbr\u003e\u003cbr\u003eMaterial: premium PLA plastic\u003cbr\u003e\u003cbr\u003eSize-\u003cbr\u003eOutside diameter: 65.4mm(approx 2.57 in), Backside clip to clip: 58.4mm(approx 2.3 in), Clip Length: 15.2mm(approx 0.59 in), Total height: 17.2mm(approx 0.68in), With 8 clip\u003cbr\u003e\u003cbr\u003eColor: Black\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2002-2016 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCenter Hub Cap Dust Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-130996af\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6844916\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016175120616,"sku":"CAT-130996af","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/center-hub-cap-dust-cover-1_1783496231787_ipsaz4.jpg?v=1793142640"},{"product_id":"car-stereo-support-bracket-2003-ford-ranger","title":"Car Stereo Support Bracket – 2003 Ford Ranger","description":"\u003cp\u003eNeed a replacement car stereo support bracket for your 2003 Ford Ranger? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eI needed a longer version for the 2003 Ford Ranger radio size.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2003 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCar Stereo Support Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-7ece661b\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7329784\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016175186152,"sku":"CAT-7ece661b","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/car-stereo-support-bracket-1_1783496314485_au69mb.jpg?v=1793142641"},{"product_id":"column-cover-2003-ford-ranger","title":"Column Cover – 2003 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing column cover on your 2003 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eInstalled an NRG steering wheel hub in my 2003 Ford Ranger, and wanted something to close the large opening. This is a quick but decent cover that uses 3 screws to secure it to the column.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2003 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eColumn Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STEP, STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-1f4043dc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4906406\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016175284456,"sku":"CAT-1f4043dc","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/column-cover-1_1778157698775_623evq.jpg?v=1793142642"},{"product_id":"cup-holder-2003-ford-ranger","title":"Cup Holder – 2003 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing cup holder on your 2003 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eI designed this for my 2003 Ford Ranger with 60\/40 seat. It's printed in BambuLabs black PETG HF to be tough and uv stable. It fits standard soda bottles and cups. The center hole is for my SABRE Tactical Pepper Gel 1.8oz. To install it slide the driver seat forward and hook the cup holder under the front edge of the seat then slide the seat back. \u003cbr\u003eEdit: I added the stl version for those who don't have a bambu printer.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2003 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCup Holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (3MF, STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-da74697b\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6904109\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016175349992,"sku":"CAT-da74697b","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/cup-holder-1_1778314649818_9h6p9o.jpg?v=1793142643"},{"product_id":"nerf-bar-end-cap-2004-ford-ranger","title":"Nerf Bar End Cap – 2004 Ford Ranger","description":"\u003cp\u003eReplace a broken or missing nerf bar end cap on your 2004 Ford Ranger with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis model snaps in place firmly but the model is created in such a way to drill the center of the support to place a screw through to a push in screw anchor to the cross support in the nerf bar.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2004 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eNerf Bar End Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-7ec11328\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4596350\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016175481064,"sku":"CAT-7ec11328","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/nerf-bar-end-cap-1_1783496403539_gve7zx.jpg?v=1793142644"},{"product_id":"52mm-vent-gauge-holder-2006-2011-ford-ranger-pk-pj","title":"52mm Vent Gauge Holder – 2006-2011 Ford Ranger PK\/PJ","description":"\u003cp\u003eNeed a replacement 52mm vent gauge holder for your 2006-2011 Ford Ranger PK\/PJ? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003emount 52mm gauge in stock ac vent\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2006-2011 Ford Ranger PK\/PJ\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003e52mm Vent Gauge Holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-7a099aad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4937721\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016175546600,"sku":"CAT-7a099aad","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/52mm-vent-gauge-holder-1_1783496291255_soeoeb.jpg?v=1793142645"},{"product_id":"dual-usb-slots-2006-2011-ford-ranger-pj-er69-mk2","title":"Dual USB Slots – 2006-2011 Ford Ranger PJ\/ER69 MK2","description":"\u003cp\u003eNeed a replacement dual usb slots for your 2006-2011 Ford Ranger PJ\/ER69 MK2? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eDual usb slots for Ford Ranger PJ ER69 MK2 2006 - 2011\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2006-2011 Ford Ranger PJ\/ER69 MK2\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDual Usb Slots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (3MF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-b2a45ea1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6737623\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016175644904,"sku":"CAT-b2a45ea1","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/dual-usb-slots-1_1783496282741_adcylk.jpg?v=1793142647"},{"product_id":"hvac-control-knob-2006-ford-ranger","title":"HVAC Control Knob – 2006 Ford Ranger","description":"\u003cp\u003eNeed a replacement hvac control knob for your 2006 Ford Ranger? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eA friend was missing a knob for his 2006 ford Ranger.  Definitely not an exact match but passable. I cut and filed a small bit from a sheet of 2mm plexiglass for a lens.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNOTE: MY NEWEST SHARED DESIGNS ARE ON PRINTABLES\u003cbr\u003ehttps:\/\/www.printables.com\/social\/253361-manimal\/models\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2006 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eHvac Control Knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-4b59f647\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:2725684\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016175743208,"sku":"CAT-4b59f647","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/hvac-control-knob-1_1777881101169_q91kkd.jpg?v=1793142648"},{"product_id":"switch-panel-2007-ford-ranger","title":"Switch Panel – 2007 Ford Ranger","description":"\u003cp\u003e3D printable replacement switch panel made for the 2007 Ford Ranger: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eI'm not sure what that pocket is supposed to be in the truck but mine was broken so I made it into a switch panel for a couple spotlights and eventually I'll hook up a lightbar. I'm not 100% sure what other years or models it would fit but if your interior looks like that it would probably fit. The way I attached it is some glue along the bottom and then a little bead of glue on either side on the top. I don't know how well it will hold up long term but for now it seems to be ok. I tried to make it so there were no screws needed to attach it but if you wanted to it wouldn't be hard to add a couple screws if you didn't want to use glue.\u003cbr\u003e\u003cbr\u003eThe switches that I made it to fit are 82-2116. You can find them on amazon but they are also in all sorts of other places. Just look for that part number. I don't know the part number of the switch cover unfortunately but I would assume that pretty much any switch cover that fits the switch should work.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2007 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSwitch Panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-113c4486\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6317783\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016175808744,"sku":"CAT-113c4486","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/switch-panel-1_1778157754333_9rql01.jpg?v=1793142649"},{"product_id":"cup-holder-insert-2010-ford-ranger","title":"Cup Holder Insert – 2010 Ford Ranger","description":"\u003cp\u003e3D printable cup holder insert for the 2010 Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eCupholder Insert for 2010 and similar Ford Ranger with insert for small drinks. Will hold water bottles, cans, and fast-food cups better than factory inserts.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2010 Ford Ranger\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCup Holder Insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e3 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-3a6eb628\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5985233\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68016175907048,"sku":"CAT-3a6eb628","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/cup-holder-insert-1_1778157791379_91sxfk.jpg?v=1793142650"}],"url":"https:\/\/partsremade.com\/collections\/ford-ranger-parts.oembed","provider":"PartsRemade","version":"1.0","type":"link"}