{"title":"Suzuki Jimny Parts","description":"\u003cp\u003e44 3D-printable replacement parts for the Suzuki Jimny (1970–2026 models), including armrest, broken key repair shell, cup holder and door pin. Every part is printed to order to replace broken, worn or discontinued originals.\u003c\/p\u003e\u003cp\u003eCan't find your part? \u003ca href=\"\/pages\/contact\"\u003eRequest it\u003c\/a\u003e. See all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki parts\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"armrest-1970-suzuki-jimny","title":"Armrest – 1970 Suzuki Jimny","description":"\u003cp\u003eReplace a broken or missing armrest on your 1970 Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eMounting the armrest to the cup holder in Jimny\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eArmrest\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-a411fc4c\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7039366\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037329649896,"sku":"CAT-a411fc4c","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/armrest-1_1783497296215_dz0e9p.jpg?v=1793180942"},{"product_id":"ashtray-to-usb-connectors-plate-1970-suzuki-jimny","title":"Ashtray To USB Connectors Plate – 1970 Suzuki Jimny","description":"\u003cp\u003eReplace a broken or missing ashtray to usb connectors plate on your 1970 Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eSuzuki Jimny Ashtray to USB connectors plate\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eAshtray To Usb Connectors Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-23f8a539\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7303042\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037352030440,"sku":"CAT-23f8a539","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/ashtray-to-usb-connectors-plate-1_1783497234878_3tdg5h.jpg?v=1793180944"},{"product_id":"broken-key-repair-shell-1970-suzuki-jimny","title":"Broken Key Repair Shell – 1970 Suzuki Jimny","description":"\u003cp\u003e3D printable replacement broken key repair shell made for the 1970 Suzuki Jimny: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThe Suzuki Jimny Keys and for sure also other Suzuki Keys from that age tend to break the upper plastic part and the keyring does not hold any more. This shell has exactly the right size to fit tightly and will not move.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eBroken Key Repair Shell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-badcc967\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6593329\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037353734376,"sku":"CAT-badcc967","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/broken-key-repair-shell-1_1783497258469_vq7ufs.jpg?v=1793180945"},{"product_id":"cup-holder-1970-2026-suzuki-jimny","title":"Cup Holder – 1970-2026 Suzuki Jimny","description":"\u003cp\u003eNeed a replacement cup holder for your 1970-2026 Suzuki Jimny? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eJimny cup holder\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970-2026 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCup Holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-8bae076f\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6789442\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037355438312,"sku":"CAT-8bae076f","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/cup-holder-1_1783419062606_i1yjh3.jpg?v=1793180946"},{"product_id":"door-pin-1970-suzuki-jimny","title":"Door Pin – 1970 Suzuki Jimny","description":"\u003cp\u003eReplace a broken or missing door pin on your 1970 Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003ePrinted in pla for Suzuki Jimny. \u003cbr\u003e\u003cbr\u003eWas printed with hole on build plate with no support.\u003cbr\u003e\u003cbr\u003eHave printed it in ABS aswell But had to make it slightly bigger to allow for shrinkage\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDoor Pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-a180701c\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:2427416\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037358977256,"sku":"CAT-a180701c","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/door-pin-1_1783497263319_q9mi8w.jpg?v=1793180947"},{"product_id":"filter-cover-with-stronger-fixings-1970-suzuki-jimny","title":"Filter Cover With Stronger Fixings – 1970 Suzuki Jimny","description":"\u003cp\u003eReplace a broken or missing filter cover with stronger fixings on your 1970 Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eSuzuki Jimny filter cover with stronger front fixing. PETG filament recomended\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eFilter Cover With Stronger Fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-8a430a89\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7116432\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037360845032,"sku":"CAT-8a430a89","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/filter-cover-with-stronger-fixings-1_1783497219097_sum6j6.jpg?v=1793180948"},{"product_id":"inside-rear-view-mirror-clip-1970-suzuki-jimny","title":"Inside Rear View Mirror Clip – 1970 Suzuki Jimny","description":"\u003cp\u003e3D printable replacement inside rear view mirror clip made for the 1970 Suzuki Jimny: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eHigh-polygons and low-poligons versions.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eInside Rear View Mirror Clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-35463ba9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3549591\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037362516200,"sku":"CAT-35463ba9","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/inside-rear-view-mirror-clip-1_1783497247051_ldszx4.jpg?v=1793180949"},{"product_id":"oil-dipstick-1970-2026-suzuki-jimny","title":"Oil Dipstick – 1970-2026 Suzuki Jimny","description":"\u003cp\u003eNeed a replacement oil dipstick for your 1970-2026 Suzuki Jimny? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eOil dipstick for car SUZUKI JIMNI. Масляный щуп\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970-2026 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eOil Dipstick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STEP, STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-c9bef365\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6564765\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037368905960,"sku":"CAT-c9bef365","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/oil-dipstick-1_1783497188822_rcivt6.jpg?v=1793180950"},{"product_id":"rear-view-camera-mount-1970-suzuki-jimny","title":"Rear View Camera Mount – 1970 Suzuki Jimny","description":"\u003cp\u003eReplace a broken or missing rear view camera mount on your 1970 Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eSuzuki Jimny rear view camera mount\u003cbr\u003e\u003cbr\u003efor printing I use transparent PETG\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eRear View Camera Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STEP, STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-ab1ade00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5587527\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037372346600,"sku":"CAT-ab1ade00","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/rear-view-camera-mount-1_1783497224241_cllai2.jpg?v=1793180952"},{"product_id":"seat-belt-support-1970-2026-suzuki-jimny","title":"SEAT Belt Support – 1970-2026 Suzuki Jimny","description":"\u003cp\u003e3D printable replacement seat belt support made for the 1970-2026 Suzuki Jimny: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eSupport ceinture SUZUKI Jimny\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970-2026 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSeat Belt Support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-523b6ef8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:2473988\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037375459560,"sku":"CAT-523b6ef8","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/seat-belt-support-1_1783521474153_ot4qxg.jpg?v=1793180952"},{"product_id":"seatlever-remix-no-supports-1970-2026-suzuki-jimny","title":"Seatlever Remix No Supports – 1970-2026 Suzuki Jimny","description":"\u003cp\u003e3D printable seatlever remix no supports for the 1970-2026 Suzuki Jimny: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eI really dislike using supports but a friend asked me to print this part for him so I remixed the original and now it can be printed without them.\u003cbr\u003e\u003cbr\u003eI actually ended up recreating the entire thing but still used the original dimensions and top part as a stamp to reverse the logo so calling it a remix seems valid + the original is nicer looking and was the inspiration.\u003cbr\u003e\u003cbr\u003eLink to Original: https:\/\/www.thingiverse.com\/thing:2102294\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970-2026 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSeatlever Remix No Supports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-1d8a05cf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3342046\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037377327336,"sku":"CAT-1d8a05cf","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/seatlever-remix-no-supports-1_1783516658628_95mqa7.jpg?v=1793180954"},{"product_id":"side-marker-gasket-light-bezel-1970-suzuki-jimny-ja22w","title":"Side Marker Gasket Light Bezel – 1970 Suzuki Jimny JA22W","description":"\u003cp\u003eReplace a broken or missing side marker gasket light bezel on your 1970 Suzuki Jimny JA22W with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eOld rubber fell apart and I wanted to reuse the oem lens, so I modeled this after the oem part but adapted it to accept the 194 bulb holders since the oem style was molded into the piece.  Also upgraded to LED while I was in there. \u003cbr\u003e\u003cbr\u003eBulb holders: https:\/\/a.co\/d\/879Y0oF\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970 Suzuki Jimny JA22W\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSide Marker Gasket Light Bezel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-869f17d1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7117190\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037380964584,"sku":"CAT-869f17d1","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/side-marker-gasket-light-bezel-1_1783497285005_f0x2ty.jpg?v=1793180956"},{"product_id":"1970-suzuki-jimny","title":"Фиксатор (кнопка) Спинки Заднего Сиденья – 1970 Suzuki Jimny","description":"\u003cp\u003eReplace a broken or missing фиксатор (кнопка) спинки заднего сиденья on your 1970 Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eПодобрал диаметры, чтобы свободно двигалась, но в то же время не гремела.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1970 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eФиксатор (кнопка) Спинки Заднего Сиденья\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-38766df0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6971781\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037384569064,"sku":"CAT-38766df0","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/suzuki-jimny-part-6971781-1_1783497289975_sf61ev.jpg?v=1793180957"},{"product_id":"2-din-stereo-adaptor-1998-2018-suzuki-jimny","title":"2-din Stereo Adaptor – 1998-2018 Suzuki Jimny","description":"\u003cp\u003e3D printable replacement 2-din stereo adaptor made for the 1998-2018 Suzuki Jimny: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eBig thanks to the original designer for uploading a .SLDPRT file of the thing, modifying the part was much easier this way.\u003cbr\u003eI added a generic adaptor as well as one purposely made to fit SONY's ax200\/ax100 car stereos. Supports are a bit difficult to remove.\u003cbr\u003eUpload a make if you happen to print this :)\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2018 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003e2-din Stereo Adaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-cd151241\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3980210\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037386731752,"sku":"CAT-cd151241","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/2-din-stereo-adaptor-1_1783420368248_x2qhn5.jpg?v=1793180957"},{"product_id":"ashtray-drawer-1998-suzuki-jimny","title":"Ashtray Drawer – 1998 Suzuki Jimny","description":"\u003cp\u003e3D printable replacement ashtray drawer made for the 1998 Suzuki Jimny: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eSome junkie-tard stole my ashtray I used to keep loose change for parking etc.\u003cbr\u003e\u003cbr\u003eThis is my replacement drawer\u003cbr\u003e\u003cbr\u003eSuzuki Jimny (1998)\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eAshtray Drawer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-c8f27bbc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:1908909\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037387649256,"sku":"CAT-c8f27bbc","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/ashtray-drawer-1_1778312142198_une6hx.jpg?v=1793180958"},{"product_id":"battery-terminal-cover-1998-2018-suzuki-jimny","title":"Battery Terminal Cover – 1998-2018 Suzuki Jimny","description":"\u003cp\u003eNeed a replacement battery terminal cover for your 1998-2018 Suzuki Jimny? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eI made this after breaking the even cheaper plastic positive terminal cover it is a work in progress i printed it at 100% infill fits of the Suzuki battery fuse holder and prevents rubbing on the bonnet .I havent tried it yet but tomorrow i will see if it fits snugly\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2018 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eBattery Terminal Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-0048a9b2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:2421017\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037389189352,"sku":"CAT-0048a9b2","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/battery-terminal-cover-1_1783420375184_lxzh0h.jpg?v=1793180959"},{"product_id":"car-stereo-fascia-plate-1998-2018-suzuki-jimny","title":"Car Stereo Fascia Plate – 1998-2018 Suzuki Jimny","description":"\u003cp\u003eNeed a replacement car stereo fascia plate for your 1998-2018 Suzuki Jimny? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis Adaptor Car Stereo Fascia Plate for Suzuki Jimny only.\u003cbr\u003eit is recomended to use ABS for this part because the car temperture can be very high\u003cbr\u003emy part is made by  PLA because my printer can not print ABS well and the part already got deformation because of the car temperture but it is still good for me and i use it for 1 year already.\u003cbr\u003ei added the solidwroks file so if you need to change something feel free :)\u003cbr\u003eEnjoy\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2018 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCar Stereo Fascia Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-ca52e18f\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:1718579\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037390074088,"sku":"CAT-ca52e18f","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/car-stereo-fascia-plate-1_1783416603700_7qo20d.jpg?v=1793180960"},{"product_id":"dashboard-bracket-1998-2018-suzuki-jimny","title":"Dashboard Bracket – 1998-2018 Suzuki Jimny","description":"\u003cp\u003e3D printable dashboard bracket for the 1998-2018 Suzuki Jimny: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eDashboard Bracket for switches, Suzuki Jimny\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2018 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDashboard Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-71972b38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6661101\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037391384808,"sku":"CAT-71972b38","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/dashboard-bracket-1_1783420363967_d899rl.jpg?v=1793180962"},{"product_id":"hood-rod-bracket-1998-suzuki-jimny","title":"Hood Rod Bracket – 1998 Suzuki Jimny","description":"\u003cp\u003e3D printable replacement hood rod bracket made for the 1998 Suzuki Jimny: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eClip or bracket to hold the hood support rod on a Suzuki Jimny\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eHood Rod Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-deba9cf6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7080516\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037392204008,"sku":"CAT-deba9cf6","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/hood-rod-bracket-1_1778357293520_kdo038.jpg?v=1793180962"},{"product_id":"interior-mirror-lock-bushing-1998-2018-suzuki-jimny","title":"Interior Mirror Lock Bushing – 1998-2018 Suzuki Jimny","description":"\u003cp\u003eReplace a broken or missing interior mirror lock bushing on your 1998-2018 Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003ejimny interior mirror lock bushing\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2018 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eInterior Mirror Lock Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-4c5fb553\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3131182\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037393121512,"sku":"CAT-4c5fb553","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/interior-mirror-lock-bushing-1_1783420372242_937xjw.jpg?v=1793180963"},{"product_id":"speaker-adapter-for-front-doors-1998-2018-suzuki-jimny","title":"Speaker Adapter For Front Doors – 1998-2018 Suzuki Jimny","description":"\u003cp\u003e3D printable speaker adapter for front doors for the 1998-2018 Suzuki Jimny: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThese adapters allow mounting a 4-bolt 5.25\" speaker in the front doors of the Suzuki Jimny. There is a 20mm and a 10mm version depending on the size of the magnet and tweeter of the chosen speaker.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2018 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSpeaker Adapter For Front Doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-ed87b6e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6310617\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037394039016,"sku":"CAT-ed87b6e7","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/speaker-adapter-for-front-doors-1_1783420358451_4m41b6.jpg?v=1793180964"},{"product_id":"suzuki-jimny-gj-sierra-mobile-phone-holder-1998-2018-suzuki-jimny-gj","title":"Suzuki Jimny Gj (sierra) Mobile Phone Holder – 1998-2018 Suzuki Jimny GJ","description":"\u003cp\u003e3D printable replacement suzuki jimny gj (sierra) mobile phone holder made for the 1998-2018 Suzuki Jimny GJ: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eHolder for 17 mm sphere phone holder. A M8 screw is required for mounting the arm.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1998-2018 Suzuki Jimny GJ\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSuzuki Jimny Gj (sierra) Mobile Phone Holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-5e105a26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4779704\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037394202856,"sku":"CAT-5e105a26","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/suzuki-jimny-gj-sierra-mobile-phone-holder-1_1783497229724_zjai6j.jpg?v=1793180965"},{"product_id":"hood-prop-rod-clip-1999-suzuki-jimny","title":"Hood Prop Rod Clip – 1999 Suzuki Jimny","description":"\u003cp\u003e3D printable hood prop rod clip for the 1999 Suzuki Jimny: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eHood prop rod retaining clip for Suzuki, part number 09403-07311\u003cbr\u003eThe model is based on accurate dimensions taken from the original clip and fits perfectly on a 1999 Suzuki Jimny. \u003cbr\u003eDesigned as a direct replacement for broken or brittle factory clips.\u003cbr\u003e\u003cbr\u003eIt may also fit: \u003cbr\u003e    Suzuki Vitara\u003cbr\u003e    Suzuki Grand Vitara\u003cbr\u003e    Suzuki Swift\u003cbr\u003e    Suzuki Ignis\u003cbr\u003e    Suzuki SX4\u003cbr\u003e    Suzuki Sidekick\u003cbr\u003e    Suzuki Baleno\u003cbr\u003e    Suzuki Esteem\u003cbr\u003e    Suzuki Aerio\u003cbr\u003e    Suzuki Alto\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1999 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eHood Prop Rod Clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-011b9912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7249743\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037394825448,"sku":"CAT-011b9912","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/hood-prop-rod-clip-1_1778312149889_36npmr.jpg?v=1793180966"},{"product_id":"shifter-bushing-1999-2005-suzuki-jimny","title":"Shifter Bushing – 1999-2005 Suzuki Jimny","description":"\u003cp\u003eNeed a replacement shifter bushing for your 1999-2005 Suzuki Jimny? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is the shifter bushing replacement for the 1999-2005 Jimny that used the earlier style of gearboxes (the ones similar to the ones the samurai used), this part is not sold separately from the gear selector so was modified to be added after and there is no associated part number that I could have added.\u003cbr\u003e\u003cbr\u003eThis was printed using Ultimaker TPU with default settings and has two channels in it for grease to be added, no scaling is required for the print.  The .STEP file is also included to make making edits easier. Feel free to make changes to the design.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1999-2005 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eShifter Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STEP, STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-98a74d02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6619764\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037395218664,"sku":"CAT-98a74d02","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/shifter-bushing-1_1783521480090_k3imj8.jpg?v=1793180967"},{"product_id":"throttle-cable-clip-1999-suzuki-jimny","title":"Throttle Cable Clip – 1999 Suzuki Jimny","description":"\u003cp\u003eNeed a replacement throttle cable clip for your 1999 Suzuki Jimny? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThrottle cable retaining clip for Suzuki, part number 09403-05311\u003cbr\u003eThe model is based on accurate dimensions taken from the original clip and fits perfectly on a 1999 Suzuki Jimny.\u003cbr\u003eDesigned as a direct replacement for broken or brittle factory clips.\u003cbr\u003e\u003cbr\u003eIt may also fit other Suzuki models.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1999 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eThrottle Cable Clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-f87c6f76\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7287991\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037395808488,"sku":"CAT-f87c6f76","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/throttle-cable-clip-1_1778311880020_525v9y.jpg?v=1793180968"},{"product_id":"center-console-cup-holder-insert-2007-suzuki-jimny","title":"Center Console Cup Holder Insert – 2007 Suzuki Jimny","description":"\u003cp\u003eReplace a broken or missing center console cup holder insert on your 2007 Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eA PETG part for the central empty space between the chairs and under the handbrake. The part was first sized with laser cutting wood model, and then it was printed for use with a Prusa MK3 with very low infill. The place for the cup holders is designed to fit a further rubber piece made for Tesla center console.\u003cbr\u003e\u003cbr\u003eThe part is a bit taller to press fit in place, however, the extra 2-3 mm didn't do much and only caused a bit of deformation so, I would suggest scaling the whole thing down in the x-y direction.\u003cbr\u003e\u003cbr\u003eThe z-direction height of the central part is a bit shorter than normal to save materials but, the rubber part proved very efficient in compensating that difference. \u003cbr\u003e\u003cbr\u003eThe link for the rubber part, which proved very efficient\u003cbr\u003ehttps:\/\/www.amazon.sa\/-\/en\/Tersely-Console-Compatible-Storage-Accessories\/dp\/B0C3VM3HW3\/ref=sr_1_8?crid=1A344FWALRYQF\u0026amp;keywords=tesla%2Bcup%2Bholder\u0026amp;qid=1696145617\u0026amp;sprefix=tesla%2Bcup%2Caps%2C189\u0026amp;sr=8-8\u0026amp;th=1\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2007 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCenter Console Cup Holder Insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-7775c29c\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6244081\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037395906792,"sku":"CAT-7775c29c","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/center-console-cup-holder-insert-1_1778357296972_vh5rje.jpg?v=1793180969"},{"product_id":"filter-cover-2010-suzuki-jimny","title":"Filter Cover – 2010 Suzuki Jimny","description":"\u003cp\u003eReplace a broken or missing filter cover on your 2010 Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eSuzuki Jimny 2010 filter cover\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2010 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eFilter Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-b42507ed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5815944\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037396037864,"sku":"CAT-b42507ed","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/filter-cover-1_1783516654792_b0xgp5.jpg?v=1793180970"},{"product_id":"a-c-vent-2018-suzuki-jimny","title":"A\/c Vent – 2018 Suzuki Jimny","description":"\u003cp\u003eReplace a broken or missing a\/c vent on your 2018 Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eNow you can print a venta for suzuki jimny\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2018 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eA\/c Vent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-6fb94303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7163580\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037396693224,"sku":"CAT-6fb94303","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/ac-vent-1_1778357300338_4cagiq.jpg?v=1793180971"},{"product_id":"front-speaker-bracket-2018-2024-suzuki-jimny-jb74","title":"Front Speaker Bracket – 2018-2024 Suzuki Jimny JB74","description":"\u003cp\u003eReplace a broken or missing front speaker bracket on your 2018-2024 Suzuki Jimny JB74 with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eRemixed design for mounting 5.25 inch speakers\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2018-2024 Suzuki Jimny JB74\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eFront Speaker Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-13fd0fb9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6628942\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037396791528,"sku":"CAT-13fd0fb9","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/front-speaker-bracket-1_1783497268002_jq3is1.jpg?v=1793180972"},{"product_id":"fuse-relay-box-2018-suzuki-jimny","title":"Fuse\/relay Box – 2018 Suzuki Jimny","description":"\u003cp\u003eReplace a broken or missing fuse\/relay box on your 2018 Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a relay\/fuse box, for holding electrinics, for accesories.\u003cbr\u003emade to go in the corner of the engine compartment in a Suzuki Jimny (2018-)\u003cbr\u003e\u003cbr\u003eThis is the box that was used in the video: \"Mounting Extra LED Lights on my Jimny!\" That is found on the TeamArmyTrucks YouTube channel.\u003cbr\u003e\u003cbr\u003e(The design has had slight changes since the video)\u003cbr\u003e\u003cbr\u003eIt consists of two files.\u003cbr\u003eOne for the Box itself.\u003cbr\u003eAnd one for the lid.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2018 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eFuse\/relay Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-d6894fba\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5930076\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037397381352,"sku":"CAT-d6894fba","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/fuserelay-box-1_1778357307823_e5bhit.jpg?v=1793180973"},{"product_id":"interior-fuse-box-cover-2018-2024-suzuki-jimny-jb74","title":"Interior Fuse Box Cover – 2018-2024 Suzuki Jimny JB74","description":"\u003cp\u003eReplace a broken or missing interior fuse box cover on your 2018-2024 Suzuki Jimny JB74 with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eFuse box cover with cutout to add circuit to 15A cigarette lighter fuse for additional USB power.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2018-2024 Suzuki Jimny JB74\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eInterior Fuse Box Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-8799900d\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7297304\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037397512424,"sku":"CAT-8799900d","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/interior-fuse-box-cover-1_1783410356879_lmdz5m.jpg?v=1793180974"},{"product_id":"mt-center-console-storage-tray-2018-2026-suzuki-jimny-gen-4","title":"Mt Center Console Storage Tray – 2018-2026 Suzuki Jimny Gen 4","description":"\u003cp\u003e3D printable mt center console storage tray for the 2018-2026 Suzuki Jimny Gen 4: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eDesigned a center console storage tray for my Suzuki Jimny Gen 4 MT 5-door. It has a cup holder, a compartment to store a cellphone and two general storage compartments.  Glue some velcro strips to the bottom to keep in position. Printed in PETG.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2018-2026 Suzuki Jimny Gen 4\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eMt Center Console Storage Tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-1a7b906d\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7090389\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037398102248,"sku":"CAT-1a7b906d","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/mt-center-console-storage-tray-1_1783497195290_21uvyf.jpg?v=1793180975"},{"product_id":"rear-camera-screwless-mount-bracket-2018-suzuki-jimny-4th-gen-jb74","title":"Rear Camera Screwless Mount Bracket – 2018 Suzuki Jimny 4th Gen (JB74)","description":"\u003cp\u003e3D printable rear camera screwless mount bracket for the 2018 Suzuki Jimny 4th Gen (JB74): download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a push-in screwless mount for the rear camera placed center above the license plate. It's best to print it with semi-soft material such as TPU.\u003cbr\u003e\u003cbr\u003eFusion 360 project included.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2018 Suzuki Jimny 4th Gen (JB74)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eRear Camera Screwless Mount Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-2c3ca0b5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5952758\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037398462696,"sku":"CAT-2c3ca0b5","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/rear-camera-screwless-mount-bracket-1_1778356192619_67062b.jpg?v=1793180976"},{"product_id":"seatheater-switch-blank-2018-suzuki-jimny-jb74","title":"Seatheater Switch Blank – 2018 Suzuki Jimny JB74","description":"\u003cp\u003e3D printable replacement seatheater switch blank made for the 2018 Suzuki Jimny JB74: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eSuzuki Jimny JB74\u003cbr\u003e\u003cbr\u003eBlank plate for Middle Console seat heater switch.\u003cbr\u003e\u003cbr\u003eIncludes version with 17mm cut-out hole for a push button.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2018 Suzuki Jimny JB74\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSeatheater Switch Blank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-62260334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:6634866\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/publicdomain\/zero\/1.0\/\" rel=\"nofollow\"\u003eCC0 1.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037398561000,"sku":"CAT-62260334","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/seatheater-switch-blank-1_1783420380414_a5abqj.jpg?v=1793180977"},{"product_id":"suzuki-jimny-deckel-anh-ngerkupplung-fj-2018-suzuki-jimny-fj","title":"Suzuki Jimny Deckel Anhängerkupplung (fj) – 2018 Suzuki Jimny FJ","description":"\u003cp\u003eNeed a replacement suzuki jimny deckel anhängerkupplung (fj) for your 2018 Suzuki Jimny FJ? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eSchutzkappe \/ Deckel für die abnehmbare Anhängerkupplung beim Suzuki Jimny (FJ).\u003cbr\u003eDeckel kann in das Loch der Anhängerkupplung gesteckt werden, falls diese abgenommen wurde.\u003cbr\u003eDamit es besser hält hab ich den Deckel nochmal mit einer Wicklung Panzertape umwickelt.\u003cbr\u003eSeit 1 Jahr ohne Probleme im Einsatz.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2018 Suzuki Jimny FJ\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSuzuki Jimny Deckel Anhängerkupplung (fj)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-82938b50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4817299\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037399216360,"sku":"CAT-82938b50","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/suzuki-jimny-deckel-anhngerkupplung-fj-1_1783497238462_7edt7t.jpg?v=1793180978"},{"product_id":"suzuki-jimny-getr-nkedosenhalter-f-r-hundegitter-fj-2018-suzuki-jimny-fj","title":"Suzuki Jimny Getränkedosenhalter Für Hundegitter (fj) – 2018 Suzuki Jimny FJ","description":"\u003cp\u003eReplace a broken or missing suzuki jimny getränkedosenhalter für hundegitter (fj) on your 2018 Suzuki Jimny FJ with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eGetränkehalter welchen ich mit Kabelbindern hinter den Rücksitzen am Hundegitter mit Kabelbindern befestigt habe.\u003cbr\u003eDurchmesser reicht für normale 0.33l sowie auch 0.5l Dosen.\u003cbr\u003eDurch den Adapterring können auch die dünneren \"Energydrink\" Dosen wie RedBull o.ä ohne Probleme befestigt werden.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2018 Suzuki Jimny FJ\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSuzuki Jimny Getränkedosenhalter Für Hundegitter (fj)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-be5e6607\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4817310\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037399347432,"sku":"CAT-be5e6607","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/suzuki-jimny-getrnkedosenhalter-fr-hundegitter-fj-1_1783497305092_7c0r1a.jpg?v=1793180979"},{"product_id":"suzuki-jimny-jb74-front-speaker-bracket-for-165mm-speakers-2018-suzuki-jimny-jb74","title":"Suzuki Jimny Jb74 Front Speaker Bracket For 165mm Speakers – 2018 Suzuki Jimny JB74","description":"\u003cp\u003eNeed a replacement suzuki jimny jb74 front speaker bracket for 165mm speakers for your 2018 Suzuki Jimny JB74? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003edid this for a friend but he was unwilling to cut into his car plastic to mount a speaker that way way too big. might be useful to you.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2018 Suzuki Jimny JB74\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSuzuki Jimny Jb74 Front Speaker Bracket For 165mm Speakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-e59600ed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7115642\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037399937256,"sku":"CAT-e59600ed","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/suzuki-jimny-jb74-front-speaker-bracket-for-165mm-speakers-1_1783497279200_f54k39.jpg?v=1793180980"},{"product_id":"top-roof-support-with-ventilators-2018-2024-suzuki-jimny-jb74","title":"Top Roof Support With Ventilators – 2018-2024 Suzuki Jimny JB74","description":"\u003cp\u003e3D printable top roof support with ventilators for the 2018-2024 Suzuki Jimny JB74: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eSupport to open roof and use ventilators for camping. Retracts when closed. PETG recommended.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2018-2024 Suzuki Jimny JB74\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eTop Roof Support With Ventilators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e5 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-8be841db\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4555918\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037400068328,"sku":"CAT-8be841db","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/top-roof-support-with-ventilators-1_1783410350060_47853u.jpg?v=1793180981"},{"product_id":"cargo-net-support-2019-suzuki-jimny","title":"Cargo Net Support – 2019 Suzuki Jimny","description":"\u003cp\u003e3D printable replacement cargo net support made for the 2019 Suzuki Jimny: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eAccessoires permettant d'installer une barre en aluminium de 16mm à la place des poignées d'origine afin d'installer un filet au plafond du Jimny.\u003cbr\u003e\u003cbr\u003eFixer avec des vis Allen M6X60\u003cbr\u003e\u003cbr\u003eUtilisé avec :\u003cbr\u003ehttps:\/\/a.aliexpress.com\/_B0f4u3\u003cbr\u003ehttps:\/\/a.aliexpress.com\/_EQYkL1F\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2019 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eCargo Net Support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-6c884c62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4676627\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037401051368,"sku":"CAT-6c884c62","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/cargo-net-support-1_1778357274097_fdtgst.jpg?v=1793180981"},{"product_id":"firewall-bracket-for-remote-radio-chassis-2019-suzuki-jimny","title":"Firewall Bracket For Remote Radio Chassis – 2019 Suzuki Jimny","description":"\u003cp\u003eNeed a replacement firewall bracket for remote radio chassis for your 2019 Suzuki Jimny? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eI made this simple bracket to mount a GME UHF remote radio chassis to the firewall of a 2019 Suzuki Jimny.\u003cbr\u003eIf you feel up the firewall behind the glove box, there are two M6 screws which this bracket can fit onto with extra M6 washers and nuts.\u003cbr\u003eIt is the white part in the photos.\u003cbr\u003eThe distance between bolts is 30mm.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2019 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eFirewall Bracket For Remote Radio Chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-2b5d52ec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3971062\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037401182440,"sku":"CAT-2b5d52ec","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/firewall-bracket-for-remote-radio-chassis-1_1778357283974_ftlrbr.jpg?v=1793180984"},{"product_id":"front-door-speaker-spacer-2019-2020-suzuki-jimny-jb74","title":"Front Door Speaker Spacer – 2019-2020 Suzuki Jimny JB74","description":"\u003cp\u003eNeed a replacement front door speaker spacer for your 2019-2020 Suzuki Jimny JB74? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a front door speaker spacer to suit the new (2019\/2020) Jimny. They let you mount larger (13cm\/5.25 inch) speakers.\u003cbr\u003eThere are two files - Rev A file suits the passenger door, it does not have a cutout for the speaker terminals, but the speaker still fits.\u003cbr\u003eRev C has been rotated so that the Pioneer Speakers sit with the labels horizontal, this is a pedantic thing and you can't see them anyway with the door trim on. There is a recess for the speaker terminals in this one. \u003cbr\u003eI recommend to use two Rev C designs and ignore the angle of the speaker.\u003cbr\u003eI used weather strip type adhesive foam to mount to the door frame and 20mm strip foam to push against the door frame.\u003cbr\u003eThere are a few sites out there showing how the Suzuki OEM kit is fitted and just copy that. (BigJimny forum in the UK is one).\u003cbr\u003eI used Pioneer TS-G1320F speakers (5.25 inch)\u003cbr\u003eI used PLA and good so far in the Australian summer, if there is a problem with car temperatures in the future, I'll remake them in ABS.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2019-2020 Suzuki Jimny JB74\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eFront Door Speaker Spacer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-702955e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4165335\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037401477352,"sku":"CAT-702955e8","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/front-door-speaker-spacer-1_1778357288632_kbmuew.jpg?v=1793180983"},{"product_id":"headrest-holder-2019-suzuki-jimny-jb64","title":"Headrest Holder – 2019 Suzuki Jimny JB64","description":"\u003cp\u003e3D printable headrest holder for the 2019 Suzuki Jimny JB64: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eI placed it diagonally on print table. Aslo you will need 2 hex screws for each holder to mount (I used 6x20, but you can test with shorter one M6). Nd it would be nice to protect cabin plastic with some soft material where metal guids of headrest ends line on one of the photos.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2019 Suzuki Jimny JB64\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eHeadrest Holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-6c5ed857\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5179676\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037402132712,"sku":"CAT-6c5ed857","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/headrest-holder-1_1778357279031_6kohcf.jpg?v=1793180984"},{"product_id":"switch-panel-wedge-2019-suzuki-jimny","title":"Switch Panel Wedge – 2019 Suzuki Jimny","description":"\u003cp\u003eNeed a replacement switch panel wedge for your 2019 Suzuki Jimny? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eI created this little 'wedge' shaped block for the 2019 Suzuki Jimny so I could mount a GME XRS370C UHF radio microphone on the centre console. It continues on the panel shape of the switch bank and gives a place to mount the microphone magnetic clip.\u003cbr\u003eI used double sided tape to stick it in place.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2019 Suzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSwitch Panel Wedge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-8aaf9d4b\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3971362\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037402198248,"sku":"CAT-8aaf9d4b","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/switch-panel-wedge-1_1778357270445_6b71gx.jpg?v=1793180985"},{"product_id":"garbage-can-mount-2021-suzuki-jimny-4","title":"Garbage Can Mount – 2021 Suzuki Jimny 4","description":"\u003cp\u003eNeed a replacement garbage can mount for your 2021 Suzuki Jimny 4? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eUse zip ties (\u0026lt;5mm width) to secure it to central metal pipe of the cargo barrier.\u003cbr\u003e\u003cbr\u003eFusion 360 project included.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2021 Suzuki Jimny 4\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eGarbage Can Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-e771f531\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5765245\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037402427624,"sku":"CAT-e771f531","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/garbage-can-mount-1_1778356218934_2gouzi.jpg?v=1793180986"},{"product_id":"large-cup-holder-for-suzuki-jimny-gen-3-seat-rail","title":"Large Cup Holder for Suzuki Jimny Gen 3 SEAT Rail","description":"\u003cp\u003eReplace a broken or missing large cup holder for suzuki jimny gen 3 seat rail on your Suzuki Jimny with this 3D printable part from PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis large cup holder was designed to hold large cups (Stanley) and to fit in the seat rail of a Gen 3 Suzuki Jimny.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eSuzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eLarge Cup Holder for Suzuki Jimny Gen 3 Seat Rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eCup Holders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-P01120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design by Brendan Harle on \u003ca href=\"https:\/\/www.printables.com\/model\/1288007-large-cup-holder-for-suzuki-jimny-gen-3-seat-rail\" rel=\"nofollow\"\u003ePrintables\u003c\/a\u003e, licensed CC BY.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68041913925864,"sku":"CAT-P01120","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/1785157155_faf04473b974_image-0.jpg?v=1793209624"},{"product_id":"suzuki-jimny-in-dash-gps-raspberry-pi","title":"Suzuki Jimny In-Dash GPS – Raspberry Pi","description":"\u003cp\u003eNeed a replacement suzuki jimny in-dash gps - raspberry pi for your Suzuki Jimny? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eAdd In-Dash GPS Navigation to your Suzuki Jimny. Simply remove the passenger airbag, print and replace with this cover. Full details on Instructables | http:\/\/www.instructables.com\/id\/3D-Printed-In-Dash-GPS-Navigation-Raspberry-Pi-3\/ I have included a blank cover with no cut-out for an LCD so you can model your own design. Love 3D printing? Love T-Shirts? Then you need to check out steps-per-mm.xyz! It is loaded with a huge range of wearable Parts \u0026amp; Components. Please help support my work here on Thingiverse and on Instructables by using the following affiliate links when making purchases. Thanks:) eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eSuzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSuzuki Jimny In-Dash GPS - Raspberry Pi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eDashboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e7 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-P01396\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design by Gregory L Holloway on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:1701583\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed CC BY-SA.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68041958326504,"sku":"CAT-P01396","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/1782709370_3e46afa18b3a_1468f2efe5817df945a0703e01dcc21c_preview_featured.jpg?v=1793209805"},{"product_id":"jimny-radio-panel-clip-suzuki-jimny","title":"Jimny Radio Panel Clip – Suzuki Jimny","description":"\u003cp\u003eNeed a replacement jimny radio panel clip for your Suzuki Jimny? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eDesigned up this clip to replace some that were missing in my car. Took measurements from the ones I still had. Seems to work fine.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eSuzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eJimny Radio Panel Clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-P03178\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design by André Colatino on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4919219\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed CC BY.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68042187276520,"sku":"CAT-P03178","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/1782697395_17ae7df4f8d5_clip.png?v=1793210672"},{"product_id":"suzuki-jimny-box-for-removed-back-seat-safety-belt-hard-top-or-cabrio","title":"Suzuki Jimny Box for Removed Back SEAT Safety Belt, Hard Top or Cabrio","description":"\u003cp\u003e3D printable suzuki jimny box for removed back seat safety belt, hard top or cabrio for the Suzuki Jimny: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eIf you remove the backseats on the Hardtop or Cabrio Jimny, there is a big hole in the cover panel. Just put this in. Does only fit 99%. I did not have enough time to perfect it. I will do, if I have the next Jimny on my hands. Mirror the box to have it for the other side of the car.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eSuzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSuzuki Jimny Box for Removed Back Seat Safety Belt, Hard Top or Cabrio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e1 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-P03181\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design by Marius on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:1481847\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed CC BY.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68042187800808,"sku":"CAT-P03181","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/1782679075_b6e566fa46fe_48cf318a3efa3d5750afb131b1f6f3e4_preview_featured.jpg?v=1793210674"},{"product_id":"suzuki-jimny-gen-4-rear-luggage-compartment-utility-anchor","title":"Suzuki Jimny Gen 4 Rear Luggage Compartment Utility Anchor","description":"\u003cp\u003e3D printable suzuki jimny gen 4 rear luggage compartment utility anchor made for the Suzuki Jimny: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a utility hook as an alternative to a tie down loop for the Jimny rear luggage compartment. It can be used to hold grocery bags or a luggage privacy cover by elastic cord or clips.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eSuzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSuzuki Jimny Gen 4 Rear Luggage Compartment Utility Anchor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-P03182\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design by Christiaan du Toit on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5429270\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed CC BY.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68042187833576,"sku":"CAT-P03182","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/1782620370_eac197765533_PSF0935.jpg?v=1793210675"},{"product_id":"suzuki-jimny-gearbox-fork-cover","title":"Suzuki Jimny Gearbox Fork Cover","description":"\u003cp\u003e3D printable suzuki jimny gearbox fork cover for the Suzuki Jimny: download the STL file and print an affordable replacement for a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a replacement for the Suzuki Jimny \"M\" series gearbox fork cover, there are two STL files, the first is a copy of the OEM part and another which is a reinforced part to help minimise breakage. I recommend printing this model with ABS with 80% infill and 4 perimeters. I also suggest you print these with the tabs facing upwards and with auto supports.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eSuzuki Jimny\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eSuzuki Jimny Gearbox Fork Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eMechanical\/Functional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-P04793\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Suzuki parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/suzuki-parts\"\u003eSuzuki replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design by Nick Wright on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:1677961\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed CC BY.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68042401317096,"sku":"CAT-P04793","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/1782709382_efe262696d5c_72a2531ef9054dc9d66b60cad30ac659_preview_featured.jpg?v=1793211928"}],"url":"https:\/\/partsremade.com\/collections\/suzuki-jimny-parts.oembed","provider":"PartsRemade","version":"1.0","type":"link"}