{"product_id":"door-storage-hanger-1997-2018-jeep-wrangler-tj-jk","title":"Door Storage Hanger – 1997-2018 Jeep Wrangler (TJ, JK)","description":"\u003cp\u003e3D printable replacement door storage hanger made for the 1997-2018 Jeep Wrangler (TJ, JK): download the STL file and print a replacement for a cracked, lost or hard-to-find original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is my design for a Jeep Door Storage Hanger for those times when you want to leave your jeep doors at home.  Other commercial and DIY designs rely on hanging the doors using the window frame which can damage your window seals.  The alternative metal hanging brackets are expensive for what you get so I figured I would try to print something and see how it performs.  Other than your filament (I use PETG for strength), you should be able to get all the additional parts for less than $15.\u003cbr\u003e\u003cbr\u003eNOTE: photos are of my prototype, I removed a screw mounting hole from the base plate and rounded off the hangers to allow doors to swing open and closed when hung.  New photos soon.\u003cbr\u003e\u003cbr\u003eThe multi-part design should allow these to work with both TJ and JK models as well as to allow for the replacement of the hangers over time if they wear.  Simply print (2) bases and (4) hangers for each pair of doors.  Snap the hangers into the base (the funnel side of the base is the top, the triangle ends of the hangers are the bottom).  Join each hanger to a base by inserting a 3\/8 lag bolt fed down from the top and secured with a nut on the bottom.  Once you have assembled both bases measure the appropriate distance between the hangers to match your jeep doors and mount the bases to a stud on your wall.  I incorporated a funnel to help guide the door hinge pins into place.\u003cbr\u003e\u003cbr\u003eAdditional parts:\u003cbr\u003e- (4) 3\/8 lag bolt, 4\" or longer\u003cbr\u003e- (4) 3\/8 nut\u003cbr\u003e- (4) mounting screws to attach to studs\u003cbr\u003e\u003cbr\u003eThe optional door catches allow you to latch the door against the wall if you wish to prevent the doors from swinging out.  You'll need (2) 3\/8-16 Square U Bolt Clamps (with no mount plate) and (4) 3\/8 nuts and (2) 3\/8 washers.  Attach a nut and washer to each clamp leg and spin to the top of the thread.  Feed the clamps through the holes on the catch plate and secure on the back with the remaining two nuts. Tighten down from the front nuts to secure the u bolt to the catch plate.  \u003cbr\u003eParts:\u003cbr\u003e- (2) 3\/8-16 Square U Bolt Clamps (with no mount plate) \u003cbr\u003e- (4) 3\/8 nuts \u003cbr\u003e- (2) 3\/8 washers. \u003cbr\u003e- (4) mounting screws to attach to studs\u003cbr\u003e\u003cbr\u003eTo mount the door catches, place a door in the installed door hanger. Secure the side of the mounted U Bolt Clamp into a door latch, then swing the door shut toward the wall, marking where the door catch plate should be mounted. Use the diagonal slots to mount the plate (preferably to a stud). You can flip the plate 180 degrees if your stud is to the left or right.  The slots should allow you to fine adjust the latch position if needed.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1997-2018 Jeep Wrangler (TJ, JK)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDoor Storage Hanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1997\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e3 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-9b1bcb72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eNo special print instructions provided.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/de\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Jeep parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/de\/collections\/jeep-parts\"\u003eJeep replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/de\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:2566498\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68034289205480,"sku":"CAT-9b1bcb72","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/door-storage-hanger-1_1777442950588_p07ors.jpg?v=1793177858","url":"https:\/\/partsremade.com\/de\/products\/door-storage-hanger-1997-2018-jeep-wrangler-tj-jk","provider":"PartsRemade","version":"1.0","type":"link"}