2 Dor Clip – 1995-2006 Dodge Stratus

In theory, a replacement for 6506853AA
Printed as two halves which then need to be glued together (I used dichloroethane).
Then, using a screwdriver drill and needle files, remove the print artifacts (the tail is specifically for this purpose) (the tail has a not-very-thick stem so you need to clamp it without strong vibrations, otherwise it will break off prematurely). After finishing, the tail can be snapped off.
The part turns out to be quite fragile and does not always survive removal from the door (though the original parts also suffer from this of course), so it is worth printing extras as spares.

Fits

• 1995-2006 Dodge Stratus

Part details

• Make: Dodge
• Model: Stratus
• Year: 1995
• Design files: 1
• Production: 3D printed to order

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

Catalogue item

This part is listed in our catalogue for reference. Want it made? Send us a request with your vehicle details.

Design credit: original design on Thingiverse, licensed CC BY-4.0.