2002 Honda Civic SI Hood Latch Handle

Replace a broken or missing 2002 honda civic si hood latch handle on your 2002 Honda Civic with this 3D printable part from PartsRemade.

About this part

Honda Civic SI (EP3) Hood Latch handle, OEM commonly breaks and costs a pretty penny. Print and save yourself the trouble and expense. Use a filament that is soluble in acetone or similar. After printing and post-process such as sanding and painting, use a small eye dropper or hypodermic needle to squirt a dozen or so drops of solvent into the cable sleeve. Use appropriate gloves, gently shake the part around so all the walls are thoroughly wetted with the solvent for about half a minute. If any solvent remains, gently shake it out onto a napkin. Quickly align the handle and press it firmly and completely onto the cable. The dissolved filament will fill in the grooves on the cable and as the solvent slowly evaporates from the part, the handle will be solidly attached to the cable. Allow several hours, preferably a few days, for full evaporation and solidification. The cable sleeve will be considerably weak until all acetone has flashed out the part.

Compatible vehicles

• 2002 Honda Civic

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Honda parts

Browse all Honda replacement parts or search the full 3D printable car parts library.

Design credit: original design by David Ford on Thingiverse, licensed CC BY.