24mm Oil Filter Housing Socket – 2012-2018 Jeep Wrangler JK
24mm Oil Filter Housing Socket – 2012-2018 Jeep Wrangler JK
3D-printed 24mm oil filter housing socket for the 2012-2018 Jeep Wrangler JK, made to order as an affordable alternative to a discontinued or expensive original part.
About this part
This is for all you makers that don't have a 24mm socket handy to change the oil in your Pentastar Jeep. A box end wrench or large crescent will work if you don't mind going 1/16 turn at a time against the drag of your old o-ring, but this makes it a little easier.
#### V1
1/2" drive tested in PLA and was able to torque filter housing to spec (25 N·m /18 ft. lbs.) as well as break it free initially without breaking the socket. In destructive testing the PLA version failed at 28 ft. lbs. You may want a large crescent to "start" your cover depending on how long it's been since it was last removed.
#### V2
Thicker (stronger) version with combo drive for 3/8" or 1/2". This will be stronger at the cost of a longer print time and more material used. Destructive testing will be done shortly and results posted... RE-UPLOADED w/ fixed scaling - Thanks for the feedback :-)
Compatible vehicles
- 2012-2018 Jeep Wrangler JK
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | 24mm Oil Filter Housing Socket |
|---|---|
| Make | Jeep |
| Model | Wrangler |
| Year | 2012 |
| Production | 3D printed to order (FDM) |
| Design files | 2 (STL) |
| Part number | CAT-b5942991 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Jeep parts
Browse all Jeep replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.