Battery Holddown – 1985 Toyota Mr2 AW11
Battery Holddown – 1985 Toyota Mr2 AW11
3D-printed replacement battery holddown made for the 1985 Toyota Mr2 AW11: a simple way to replace a cracked, lost or hard-to-find original part.
About this part
My aw didn't come with the battery hold down and nobody online sells ones that fit the special battery holder thing on this old car, so I modeled it. For screws I used 1x 14" J-bolt and 1x 1/4-3/4 bolt from ace the helpful place (tacoma screw was closed). Depending on how large of a bolt you use for the upper flange, you might need some washers to act as spacers.
Hope this helps someone. Seems to do a half-decent job of holding my battery in place.
Compatible vehicles
- 1985 Toyota Mr2 AW11
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Battery Holddown |
|---|---|
| Make | Toyota |
| Model | MR2 |
| Year | 1985 |
| Production | 3D printed to order (FDM) |
| Design files | 1 (STL) |
| Part number | CAT-aef0f804 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Toyota parts
Browse all Toyota replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed GNU GPL.