Center Console Tray Modified From Jonco223 – 2017-2026 Tesla Model 3

Replace a broken or missing center console tray modified from jonco223 on your 2017-2026 Tesla Model 3 with this 3D printable part from PartsRemade.

About this part

This is a center console tray (with coin tray) remix from jonco223's design. The original design is great but I just have some pet peeves that I needed to modify...

The following are the modifications:

1. Fix - The wall thickness below the coin tray is too thin for 0.4mm nozzle to print, I was getting a pin-hole in my original print.

2. Fix - The step-down from the top ledge is rubbing against the center console cover. I recessed it back 10mm. This problem will show up if you plan on flocking the tray - the rubbing will rub off the flocking fibers and the paint.

3. Mod - Added a partial opening in the front of the tray to allow cable or light to come thru from the bottom of the center console.

4. Mod - Rounded out most of the straight edges in the tray as (and I'm still learning) sharp corners don't stick to flocking fibers too well.

Compatible vehicles

• 2017-2026 Tesla Model 3

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Tesla parts

Browse all Tesla replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-4.0.