Climate Control Knob – 1997-1998 Jeep Wrangler TJ (Early TJ (Pre-1999))
Climate Control Knob – 1997-1998 Jeep Wrangler TJ (Early TJ (Pre-1999))
Replace a broken or missing climate control knob on your 1997-1998 Jeep Wrangler TJ (Early TJ (Pre-1999)) with this 3D printable part from PartsRemade.
About this part
This is a climate control knob for an early TJ (Pre-1999) model. If the heater control is a straight line, this is the correct knob (see picture). I imagine this will work with other Chrysler brand vehicles with the same setup.
I printed with .1 height, 3 walls, and 25% infill. I find .1 gives a smoother stock finish.
There are two variants. With indicator notch, or without.
Jeep Early TJ Climate Control knob.stl - Pure black without indicator
Jeep Early TJ Climate Control Knob - notched - knob with notch for indicator
Jeep Early TJ Climate Control Indicator - indicator you should print in white.
The indicator is 97% of the original size. This will allow for placement into the knotch. Scale up/down based upon the dimensional accuracy of your printer.
Compatible vehicles
- 1997-1998 Jeep Wrangler TJ (Early TJ (Pre-1999))
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Climate Control Knob |
|---|---|
| Make | Jeep |
| Model | Wrangler |
| Year | 1997 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 3 (STL) |
| Part number | CAT-821c1fa9 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Jeep parts
Browse all Jeep replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.