Clock Gear – 1974-1978 Cadillac Eldorado

Replacement model for the brown gear found in these year clocks that always are missing
Resin print is basically required for this small scale and i recommend using a small amount of silicone to attack the gear, or else it can slip

REVISED
So the original designed gear was slightly too big and had a problem where over the course of a few weeks the clock will stop working because the gear would build up friction against the edges and stall. This happened because in order for the gear to sit in properly it needed to be put in pretty loose. I thought this was normal and a result of how the clock was designed but NOPE. The issue is solved but this slightly smaller version of the gear which allows it to be tightened all of the way. Allowing the gear to sit solidly inside the clock with now irregular movements

SCALE
scale the gear to 50% of its size in whichever slicer you put it in. The gear should measure about 6 mm total width when scaled to 50%

Fits

• 1974-1978 Cadillac Eldorado

Part details

• Make: Cadillac
• Model: Eldorado
• Year: 1974
• Design files: 1
• Production: 3D printed to order

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

Catalogue item

This part is listed in our catalogue for reference. Want it made? Send us a request with your vehicle details.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.