Console Cupholder Lower Part – 1998-2000 Volvo V70
Console Cupholder Lower Part – 1998-2000 Volvo V70
Replace a broken or missing console cupholder lower part on your 1998-2000 Volvo V70 with this 3D printable part from PartsRemade.
About this part
Replacement for the part of the console cup holder that drops down and supports the bottom of a drink. Should work for Volvo V70 and S70 models from 1998 to 2000.
You probably don't want to print this in PLA; print in ABS or some other material that can handle being in a hot car.
Compatible vehicles
- 1998-2000 Volvo V70
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Console Cupholder Lower Part |
|---|---|
| Make | Volvo |
| Model | V70 |
| Year | 1998 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-637949b3 |
Print settings
As mentioned above, printing this in PLA is probably a bad idea.
This is not a copy of the original Volvo part but it should be functionally equivalent. I tried to minimize the need for support but the axle pegs will most likely need them. (I needed supports for the pegs while printing on a Makerbot Dual.) You will probably need to press hard to get the pegs into the console; be careful not to bend the pegs too much.
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Volvo parts
Browse all Volvo replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.