Cubby Tray – 2016-2019 Ford Fiesta MK7

3D-printed replacement cubby tray made for the 2016-2019 Ford Fiesta MK7: a simple way to replace a cracked, lost or hard-to-find original part.

About this part

A cubby tray I designed to make the weird cubby in the Fiesta center console useable. This should provide a perfect fit for any of the fiestas with that cubby (mk7s...2016 and on, I think). See pictures for reference.

I printed this in ASA, but you can probably get away with ABS or PETG, if you want (I just find ASA prints better than PETG and is less stinky than ABS...plus, UV protection!) Just remember your car interior will probably get hot enough to warp PLA.

Print the model with the back/rear of the tray flat against the build plate. The overhangs are such that you should not need any supports, but you know your printer best. I printed with no supports and it came out very nice. Make sure you establish good, first layer adhesion to prevent failures late in the print. Use a brim or raft if it makes sense for your set up. Remember, since the bottom of the print is the back of the tray, it's ok if it is not absolutely perfect (nobody will ever see it).

Of desired, you can put a bit of double-sided tape on the back of the tray, to hold it in place, but I have never found it necessary.

As always, my designs are free to use, but please don't steal or sell 'em. Good luck, and happy printing!

Compatible vehicles

• 2016-2019 Ford Fiesta MK7

Always compare with your original part before ordering. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

How to order

This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.

More Ford parts

Browse all Ford replacement parts or search the full 3D-printed car parts catalogue.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.