Defroster Vent Insert – 1990-1999 Toyota Mr2 SW20
Defroster Vent Insert – 1990-1999 Toyota Mr2 SW20
3D-printed defroster vent insert for the 1990-1999 Toyota Mr2 SW20, made to order as an affordable alternative to a discontinued or expensive original part.
About this part
This is to repair your broken defroster vent on the passenger side of the mr2 dash. Tolerances are tight. Depending on your printer, you may need to file this part a little. My Bambu X1c printed it perfectly. Use at minimum, ASA for temp.
*note* layer direction matters. if you print layers in the wrong direction, the part will break when you install it. I uploaded my 3mf file as well as an STL.
I didn't use any glue, but you certainly could put a drop or two on the sides, as well as put a screw to hold it into place. I would rather reassemble the part than break the vent any further on my next repair.
Compatible vehicles
- 1990-1999 Toyota Mr2 SW20
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Defroster Vent Insert |
|---|---|
| Make | Toyota |
| Model | MR2 |
| Year | 1990 |
| Production | 3D printed to order (FDM) |
| Design files | 1 (STL) |
| Part number | CAT-9a9cafda |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Toyota parts
Browse all Toyota replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.