Fog Light Surrounds – 2007-2018 Jeep Wrangler JK

3D-printed fog light surrounds for the 2007-2018 Jeep Wrangler JK, made to order as an affordable alternative to a discontinued or expensive original part.

About this part

So I gutted my original plastic bumper to put it onto a Winch Plate. By doing this I lost the depth needed for the factory Fog lights. I then went and bought a pair from my local store to replace them with, as they were not the same size, I made bigger holes for these to fit in.

There are 2 parts, the inner and outer part.

First, hold the inner part over the existing hole trace the outline of it, and cut the hole to size, then slide the inner part in, you don't need to glue anything as there are screws that will hold it together when the outer ring is slid over the light.

The new light will be going inside and the outer ring will keep this light in place. if you have any questions let me know.

I used a 5" Fog light combo.
similar to this:
https://www.amazon.ae/LED-Moso-Waterproof-Driving-Warranty/dp/B07G91BY56/ref=sr_1_19?adgrpid=92969114572&dchild=1&gclid=CjwKCAjwrKr8BRB_EiwA7eFapsFWUdVc11Jrz8aVNcEJDgOSGZRP6lk0lGo3Y0vJNEYJMhCWA34suxoCyikQAvD_BwE&hvadid=409245238506&hvdev=c&hvlocphy=1000010&hvnetw=g&hvqmt=b&hvrand=11296311693359353677&hvtargid=kwd-306189938398&hydadcr=4398_1907357&keywords=offroad+lights+5+inch&qid=1603004602&sr=8-19&tag=googleaepcstd-21

Compatible vehicles

• 2007-2018 Jeep Wrangler JK

Always compare with your original part before ordering. Fitment can vary by trim level and production date.

Specifications

Print settings

No special print instructions provided.

How to order

This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.

More Jeep parts

Browse all Jeep replacement parts or search the full 3D-printed car parts catalogue.

Design credit: original design on Thingiverse, licensed CC BY-4.0.