Front Bumper License Plate Cap Insert – 2004 Honda Cr-v
Front Bumper License Plate Cap Insert – 2004 Honda Cr-v
3D-printed replacement front bumper license plate cap insert made for the 2004 Honda Cr-v: a simple way to replace a cracked, lost or hard-to-find original part.
About this part
Missing one and decided to mirror it and replace both license plate caps
These can be installed with epoxy or caulk. I designed them to use rust proof 1-inch sheet-rock screws to spread the small plug. I ground the pointy tip off of the screw, just in case the bumper skin is pushed back far enough to touch the AC condenser... but if it ends up that far back you have bigger problems.
You might want to scale these down by 1% or 2% for a better fit... depending on the material and printer you use.
Compatible vehicles
- 2004 Honda Cr-v
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Front Bumper License Plate Cap Insert |
|---|---|
| Make | Honda |
| Model | CR-V |
| Year | 2004 |
| Production | 3D printed to order (FDM) |
| Design files | 1 (STL) |
| Part number | CAT-9b62f793 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Honda parts
Browse all Honda replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-4.0.