Handbrake Hole Plug – 2015 Ford Fiesta

3D printable replacement handbrake hole plug made for the 2015 Ford Fiesta: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.

About this part

If you want to leave a tip, I would appreciate it <3

ETH: 0xc3332e495F1dcA93Aa1c111Cc68e710a64Eaac51

DOGE: DBs37DfixdWaMTrZrbZ3qVDwSPYhkn8Uxe

BTC: bc1qqf56wrcfezul5d2weqfce6dvrw6a7gz29gpl2r

Couple of guys here posted their designs, but after a while they took it down and wanted some money for it. I needed this for my Fiesta so i designed it, measure it and now its doing its job very well. My fiesta is 2015, but i can imagine it will work on many more models. If you print it and it works on your model, comment what year model do you have.

Print flat, no support. Use double tape or super glue to fasten it in the hole. I used super glue, it works well. Do this while handbrake is in upper position and make sure black hole doesnt swallow it (mine did, i needed to print it 2 times :D ). Depending on your printer, you will need to maybe enlarge it or shirink it for a couple of percents to have snug fit. Mine was good at 1:1...

If you want to thank me, share my model in relevant groups :)

Compatible vehicles

• 2015 Ford Fiesta

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Ford parts

Browse all Ford replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-4.0.