Hood Stop – 1993 Jeep Grand Cherokee (Laredo)
Hood Stop – 1993 Jeep Grand Cherokee (Laredo)
3D-printed replacement hood stop made for the 1993 Jeep Grand Cherokee (Laredo): a simple way to replace a cracked, lost or hard-to-find original part.
About this part
I have a 1993 Jeep Grand Cherokee Laredo that was missing or had some broken parts under the hood.
One of these parts was what I call a hood stop. There is on on either side of the front that hold the hood at the right level when it is latched. One of these had broken off and was missing so I decided to make a new one.
This is based on measurements of the original and works. It is a little tight getting it started but then goes in fine. The threads could potentially be made slightly thinner but it worked as is. I will include a STP file if anyone wants to edit it.
I printed it top side down on an Ultimaker S5 with soluble support. It is printed in ABS as I was concerned about the low glass temp of PLA. You should be able to print with break away supports also. I did 3 shells and 20% fill.
Caution: You should make your own decisions about using this under your vehicle hood.
Compatible vehicles
- 1993 Jeep Grand Cherokee (Laredo)
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Hood Stop |
|---|---|
| Make | Jeep |
| Model | Grand Cherokee |
| Year | 1993 |
| Production | 3D printed to order (FDM) |
| Design files | 3 (STL, STP) |
| Part number | CAT-f6d72b66 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Jeep parts
Browse all Jeep replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-4.0.