Left Side Dash Mount For Ktuner – 2016-2021 Honda Civic 10th Gen
Left Side Dash Mount For Ktuner – 2016-2021 Honda Civic 10th Gen
3D-printed left side dash mount for ktuner for the 2016-2021 Honda Civic 10th Gen, made to order as an affordable alternative to a discontinued or expensive original part.
About this part
Designed to get KTuner off the windshield and down lower on the dash. Uses the standard ball size of the windshield mount so that the socket and nut can be reused from it.
Could also be used for a cellphone or GPS mount.
Attaches to dashboard using 2 short pan head sheetmetal screws. Predrill underneath the plastic surround. Caution: Drill though only one wall. Surround plastic is soft, so do not overtighten the screws.
Printing:
Printed "prototype" parts in PLA on TEVO Flash. Since PLA will not withstand the high temperatures of an auto interior in the summer, the final part was printed in nylon on a MakerBot Method printer.
Set top surface (that attaches to underside of vent surround) as the surface on the build plate.
Set support angle to 60° so that the bottom lip prints without support.
Both SLA and STEP files uploaded. Let's see what you can do with this mounting location!
Compatible vehicles
- 2016-2021 Honda Civic 10th Gen
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Left Side Dash Mount For Ktuner |
|---|---|
| Make | Honda |
| Model | Civic |
| Year | 2016 |
| Production | 3D printed to order (FDM) |
| Design files | 2 (STEP, STL) |
| Part number | CAT-7e3c0fcb |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Honda parts
Browse all Honda replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-4.0.