{"product_id":"license-plate-light-backup-camera-mount-2004-ford-crown-victoria","title":"License Plate Light Backup Camera Mount – 2004 Ford Crown Victoria","description":"\u003cp\u003eNeed a replacement license plate light backup camera mount for your 2004 Ford Crown Victoria? This 3D-printed part is made to order to replace a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eUpdate 5\/10\/23: the gasket fits perfectly. Light transmission is good with the \"solid\" version printed in clear PETG. Additional photos of that version added.\u003cbr\u003eUpdate 5\/4\/23: added a model for a gasket. Print from TPU. I initially just cut one from gasket rubber I had on hand, but it's red. The OEM gasket might fit, but is usually firmly stuck to the OEM light, whether by intent or time, so here's a new one! It's literally an extrusion of the top mounting surface of the mount with the inner opening offset 0.5mm for clearance. That should be enough, but I will print one up and check soon.\u003cbr\u003eI've also printed up the rev 4.5 in clear, and it looks decent. I'll have to install and see how good or bad the light transmission is.\u003cbr\u003eUpdate 5\/3\/23: Added Rev 4.5, and 4.5 Clear. I imported the model into Fusion 360 and extended some surfaces to avoid awkward small insets and weird angles, and added a bunch of fillets for a cleaner appearance. Removed some extraneous surfaces that were artifacts of TinkerCAD's additive process. The \"Clear\" version features fully enclosed light boxes, intended to be printed in transparent material. I have not printed these yet, so please let me know if anything blows up.\u003cbr\u003eA reversing camera mount for Ford Crown Victorias that replaces the license plate light. It should fit 1998-2012 Crown Vics and Mercury Grand Marquis, possibly Town Cars - I have not looked at the license plate light on those.\u003cbr\u003eIt was designed to fit an Atoto reversing camera, but will likely fit a variety of Chinese-made cameras. Mounting holes may differ, of course, and the angle may not be exactly correct depending on the field of view angle of your camera. The large hole on top is for the big honking RCA plug my camera came with to pass through. Many cameras have a much smaller pug that connects to a harness with the standard RCA plug, but this one didn't, unfortunately. Please feel free to modify as necessary for your camera - I'd love to hear about someone else getting use out of this.\u003cbr\u003eThe factory license plate light twists right in. I added a second socket and wiring spliced in for even lighting, but the single light is most likely adequate for legality. this was sliced with PrusaSlicer using an AnkerMake M5 profile @ 15% infill, and printed on an AnkerMake M5 using default settings, taking about an hour to print.\u003cbr\u003eThis is my first original design, and I'm really happy with how it came out! TinkerCAD is a treat to use for simple designs like this.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2004 Ford Crown Victoria\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before ordering. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eLicense Plate Light Backup Camera Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eCrown Victoria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduction\u003c\/th\u003e\n\u003ctd\u003e3D printed to order (FDM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign files\u003c\/th\u003e\n\u003ctd\u003e4 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-befba4db\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eHow to order\u003c\/h2\u003e\u003cp\u003eThis part is in our catalogue and is printed on request. \u003ca href=\"\/pages\/contact\"\u003eSend us a request\u003c\/a\u003e with your vehicle details and we will reply with a price and delivery time.\u003c\/p\u003e\u003ch2\u003eMore Ford parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/ford-parts\"\u003eFord replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D-printed car parts catalogue\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5962245\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68015994634472,"sku":"CAT-befba4db","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/license-plate-light-backup-camera-mount-1_1767926351362_smwgys.jpg?v=1793141827","url":"https:\/\/partsremade.com\/products\/license-plate-light-backup-camera-mount-2004-ford-crown-victoria","provider":"PartsRemade","version":"1.0","type":"link"}