{"product_id":"m6-nut-with-large-integral-washer-trim-fastener-clip-2017-2026-tesla-model-3","title":"M6 Nut With Large Integral Washer Trim Fastener Clip – 2017-2026 Tesla Model 3","description":"\u003cp\u003e3D-printed m6 nut with large integral washer trim fastener clip for the 2017-2026 Tesla Model 3, made to order as an affordable alternative to a discontinued or expensive original part.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eVery simple mash-up of a nut and a washer because I needed them...\u003cbr\u003e\u003cbr\u003eI used https:\/\/www.thingiverse.com\/thing:311031 OpenSCAD ISO metric thread library by TrevM (thank you!) to create a metric 6mm-thread nut (10mm hex).\u003cbr\u003e\u003cbr\u003eI used Designspark Mechanical to add an integral washer (flange) as I could not find a suitable nut or clip on Thingiverse (honourable mention; https:\/\/www.thingiverse.com\/thing:3401133 by StuartL; close to what I needed.)\u003cbr\u003e\u003cbr\u003eIf you open the file in Designspark, you can easily 'pull' the outer surface to get a different flange diameter without affecting the nut size. I've created two sizes this way; large (25mm dia.) and small (18mm dia.) and have attached both files.\u003cbr\u003e\u003cbr\u003eI've printed these with my Anycubic Delta but had smoother results with my Ender 3 - the Ender 3 is such a popular printer that I've also attached the gcode for this - try it if you're feeling lucky! - my printer is stock\/unmodified and I'm using generic PLA filament.\u003cbr\u003e\u003cbr\u003eIf you're wondering what I needed an M6 nut with integral washer for - my Tesla Model 3 wheelarch liners were missing a number of fasteners from the factory. There were gaps where the liner didn't touch the wheelarch. The car has M6 threaded studs protruding from the sheet steel in the wheel well. The factory uses a thin plastic clip\/washer that presses onto the stud. These are not very strong and don't fit very well, so an improved fastener is needed.\u003cbr\u003e\u003cbr\u003eI could have used steel nuts, but they would probably corrode in the wheel well, plus I wanted a large washer to hold the fabric lining in place. If I'd used stainless steel nuts, they would stand out\/need painting. Plastic nuts have a self-locking quality.\u003cbr\u003e\u003cbr\u003eI am happy to report that the 3D-printed nuts can be screwed on with fingers, but a 10mm socket can also be used (same size as a standard bolt securing the lower corner of the liner).\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2017-2026 Tesla Model 3\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before ordering. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eM6 Nut With Large Integral Washer Trim Fastener Clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eTesla\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eModel 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduction\u003c\/th\u003e\n\u003ctd\u003e3D printed to order (FDM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign files\u003c\/th\u003e\n\u003ctd\u003e2 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-07e6c3ad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eHow to order\u003c\/h2\u003e\u003cp\u003eThis part is in our catalogue and is printed on request. \u003ca href=\"\/pages\/contact\"\u003eSend us a request\u003c\/a\u003e with your vehicle details and we will reply with a price and delivery time.\u003c\/p\u003e\u003ch2\u003eMore Tesla parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/tesla-parts\"\u003eTesla replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D-printed car parts catalogue\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3926749\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037510922472,"sku":"CAT-07e6c3ad","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/m6-nut-with-large-integral-washer-trim-fastener-clip-1_1783420041551_yppdcp.jpg?v=1793181099","url":"https:\/\/partsremade.com\/products\/m6-nut-with-large-integral-washer-trim-fastener-clip-2017-2026-tesla-model-3","provider":"PartsRemade","version":"1.0","type":"link"}