Mobile Phone Mount Rhd – 2007-2014 Ford Mondeo Mk4

Replace a broken or missing mobile phone mount rhd on your 2007-2014 Ford Mondeo Mk4 with this 3D-printed part, produced to order by PartsRemade.

About this part

I bought a 2012 MK4 Ford Mondeo and realised there was nowhere sensible to mount a mobile phone.
As I had the 'power' start button my trim was all one piece so I decided to design my first thing!

It does involve opening the dash a little but this was to stop it from sliding out, I managed to do it but pulling the start button edge trim off and gently unscrewing the 2 screws behind just enough to lean the dashboard forward slightly.

Made the base of the ball a little thicker and even though the right side (bottom when printing) of the ball didn't print perfectly it still works well.

Add a little black foam pad beneath the bottom support to stop it scratching the dash.


Printing:
***Print in ABS, the PLA went soft in the summer and drooped, ABS has been fine the past year***
Printed in Black PLA as ABS just kept warping and causing the ball to fail.

100% infill for strength
Support from buildplate
I used a raft due to the small edges slightly curling off the bed but not required.

Compatible vehicles

• 2007-2014 Ford Mondeo Mk4

Always compare with your original part before ordering. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

How to order

This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.

More Ford parts

Browse all Ford replacement parts or search the full 3D-printed car parts catalogue.

Design credit: original design on Thingiverse, licensed CC BY-4.0.