{"product_id":"mud-guards-front-2017-2026-tesla-model-3","title":"Mud Guards Front – 2017-2026 Tesla Model 3","description":"\u003cp\u003eReplace a broken or missing mud guards front on your 2017-2026 Tesla Model 3 with this 3D-printed part, produced to order by PartsRemade.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003e3D printed Mud guards for the Tesla Model 3 front wheels. Installation is very easy and takes only a few minutes. No drilling or other modifications is required. \u003cbr\u003e\u003cbr\u003ePrint the parts, remove any sharp edges, blobs or other imperfections and open up the hole for the push-in clip. Rub over the visble areas with a 3M Scotch Brite pad and plenty of water to obtain a nice matte finnish.\u003cbr\u003e\u003cbr\u003eHardware: \u003cbr\u003e6 pc M3x8mm stainless screws (hex button head or hex socket head recommended), 6 pc stainless M3 nuts. Please note that the screw length must be exactly 8mm. \u003cbr\u003e\u003cbr\u003eTools:\u003cbr\u003eAllan-key for the M3 screws and a flat screw-driver for the Tesla push-in rivet\u003cbr\u003e\u003cbr\u003eInstallation:\u003cbr\u003e- Clean the area thoroughly, there must be no sand or dirt between the paint and the printed parts.\u003cbr\u003e- Release and remove the Tesla plastic push-in rived using the flat screw-driver.\u003cbr\u003e- Assemble the printed mud guard and the back plate. Let only a few threads on the M3 screws grip into the M3 nuts to make maximum slack between the two printed parts.\u003cbr\u003e- Keeping some spacing between the printed parts, carefully slide the mud guard into position, the back-plate goes behind the steel lip. \u003cbr\u003e- Adjust position.\u003cbr\u003e- Reinstall the Tesla plastic push-in rivet.\u003cbr\u003e- Fine adjust the position again if neccessary.\u003cbr\u003e- Tighten the M3 screws.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2017-2026 Tesla Model 3\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before ordering. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eMud Guards Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eTesla\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eModel 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduction\u003c\/th\u003e\n\u003ctd\u003e3D printed to order (FDM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign files\u003c\/th\u003e\n\u003ctd\u003e5 (STL, STP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-02ccddfc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eHow to order\u003c\/h2\u003e\u003cp\u003eThis part is in our catalogue and is printed on request. \u003ca href=\"\/pages\/contact\"\u003eSend us a request\u003c\/a\u003e with your vehicle details and we will reply with a price and delivery time.\u003c\/p\u003e\u003ch2\u003eMore Tesla parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/tesla-parts\"\u003eTesla replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D-printed car parts catalogue\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:3900366\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\" rel=\"nofollow\"\u003eCC BY-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68037511872744,"sku":"CAT-02ccddfc","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/mud-guards-front-1_1783491148814_dfx56j.jpg?v=1793181104","url":"https:\/\/partsremade.com\/products\/mud-guards-front-2017-2026-tesla-model-3","provider":"PartsRemade","version":"1.0","type":"link"}