Nalgene Cupholder T1n Van – 1995-2026 Mercedes-benz Sprinter T1N

Replace a broken or missing nalgene cupholder t1n van on your 1995-2026 Mercedes-benz Sprinter T1N with this 3D printable part from PartsRemade.

About this part

I was tired of having my Nalgene water bottle rolling around inside my van so I designed and printed this cupholder extension. It's designed to fit a Nalgene bottle but also holds a large Hydroflask or coffee mugs and also leaves room for conventionally sized cup or can in the original holder. The larger holder is offset to compensate for the bulging dash above the cupholders. I deliberately designed it to fit somewhat loose in the cupholder, then shimmed with electrical tape to the get the fit just right. It took my 6-8 wraps of electrical tape to get a snug fit. This might work for other vehicles also but I've only tested it in my T1N model Sprinter Van.

Printed with support plus a brim. I used PETG. Requires about 250 grams of filament. I designed it in Fusion360 and I'm including both the f3d and stl files.

Compatible vehicles

• 1995-2026 Mercedes-benz Sprinter T1N

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Mercedes-Benz parts

Browse all Mercedes-Benz replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.