Plastic Body Trim Peg Clip – 1991-1996 Subaru Svx
Plastic Body Trim Peg Clip – 1991-1996 Subaru Svx
3D-printed replacement plastic body trim peg clip made for the 1991-1996 Subaru Svx: a simple way to replace a cracked, lost or hard-to-find original part.
About this part
My Patreon if you wanna throw me a dollar! https://www.patreon.com/pacodeth
These are pegs / clips for holding on body panel trim pieces on a Subaru SVX. I created this to replace a broken peg that was holding on the lower plastic trim piece at the bottom of my drivers side door, no clue if it works elsewhere on the car.
It's not perfect, by the generation number you can see it took me 15 tries to get it where it is right now. This 15th generation worked the best, but there is probably more refinement that could be made as the body panel isn't perfectly flush (but quite close!)
Feel free to print out, try out, and let me know how it works for you, and if you have any recommended adjustments to make it more perfect. Going back and forth from my house to my removed garage during the winter to test out prints and variations got tiring and I gave up at the 15th generation.
Included are two STL variations. I believe the 15th is the one I am using, where the 15.5 is a more solid variant, but both should hold up for their intended purposes. The slot in the steel body of the car should be oval/rectangle shaped, so you want to slide the rectangle side in to the body, then turn it a quarter turn to lock it in place.
Also included are the two Sketchup files, so you can load it up yourself to make adjustments as you see fit. Sketchup is a free program and pretty easy to use/learn.
Print with supports.
Compatible vehicles
- 1991-1996 Subaru Svx
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Plastic Body Trim Peg Clip |
|---|---|
| Make | Subaru |
| Model | SVX |
| Year | 1991 |
| Production | 3D printed to order (FDM) |
| Design files | 2 (STL) |
| Part number | CAT-e85098f6 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Subaru parts
Browse all Subaru replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-4.0.