Rear Speaker Bracket – 2006-2008 Mazda Mx-5 Miata NC
Rear Speaker Bracket – 2006-2008 Mazda Mx-5 Miata NC
3D-printed replacement rear speaker bracket made for the 2006-2008 Mazda Mx-5 Miata NC: a simple way to replace a cracked, lost or hard-to-find original part.
About this part
Replace your factory rear 3.5" speakers with Aftermarket speakers from Kicker, JL Audio, Rockford Fosgate, etc!
The factory speaker mount in the Miata is too small to accept the larger baskets/magnets of most aftermarket speakers, so I made a new one! This bolts right into the factory location, puts the speakers right where they need to be, and allows the plastic covers to go back in place without any obstructions. You may need to cut off a small metal piece on a tab just behind the driver side speaker to get it to fit perfectly (just depends on what aftermarket speakers you go with).
I recommend buying some 5 minute epoxy from Walmart for $5. After you're done printing, mix some up and using a cheap acid brush (or similar) apply it to the exterior of the piece to make it as strong as a plastic-injection part by the time you're done.
Compatible vehicles
- 2006-2008 Mazda Mx-5 Miata NC
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Rear Speaker Bracket |
|---|---|
| Make | Mazda |
| Model | MX-5 Miata |
| Year | 2006 |
| Production | 3D printed to order (FDM) |
| Design files | 4 (STEP, STL) |
| Part number | CAT-96b6efec |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Mazda parts
Browse all Mazda replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-4.0.