Rearview Mirror Dash Camera Mount Bracket – 2005-2013 Chevrolet Corvette C6
Rearview Mirror Dash Camera Mount Bracket – 2005-2013 Chevrolet Corvette C6
Need a replacement rearview mirror dash camera mount bracket for your 2005-2013 Chevrolet Corvette C6? This 3D-printed part is made to order to replace a broken, worn or missing original piece.
About this part
This is a bracket to mount a Mobius Actioncam to the rear view mirror of C6 Corvettes. It removes the cover in the front of the stack and uses a zip tie or similar through the mirror to keep it from moving. This keeps the camera out of the drivers view and somewhat hidden from others (me being 6'2", visibility was the concern).
The plastic piece that attaches the mirror to windshield has a plastic plate that faces forward and covers a pocket. The pocket on my car contained nothing, hopefully the higher trim levels do not have something in their. The cover snaps on and off easily. I first tried to fit the camera in the pocket since it was a nearly perfect fit but I couldn't find a way to plug it in without drilling the back of the pocket. So instead, I 3D printed a part to fit in the pocket with a zip tie going through the printed part and the 2 holes of the mirror mount that the cover snapped into.
Note: For anyone who wants to do this, you much change the lithium battery in the camera out for the capacitor instead. The heat in the sun may cause the battery to fail, swell, or in worst case, catch fire. The capacitor works well but you have to reprogram the camera to turn on and off with power. To control the camera, use either a switched cigarette lighter, power from the radio unit, and a 5V regulator off a switched fuse.
Compatible vehicles
- 2005-2013 Chevrolet Corvette C6
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Rearview Mirror Dash Camera Mount Bracket |
|---|---|
| Make | Chevrolet |
| Model | Corvette |
| Year | 2005 |
| Production | 3D printed to order (FDM) |
| Design files | 1 (STL) |
| Part number | CAT-f47c5f8e |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Chevrolet parts
Browse all Chevrolet replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-4.0.