Rocker Trim Clip – 1958 Edsel Edsel
Rocker Trim Clip – 1958 Edsel Edsel
3D-printed rocker trim clip for the 1958 Edsel Edsel, made to order as an affordable alternative to a discontinued or expensive original part.
About this part
These rocker trim clips are based on the plastic clips used for a 1995 or above Ford Mustang but modified to fit the 1958 Edsel.
The Edsel originally included metal clips that would mount to the car first, then the trim would rest onto the clip and pressed firmly at the bottom to snap it into place. This method had very tight tolerances and could easily fall off, or be stolen.
This new clip design is very easy to install because you can use the existing mounting holes, or drill new ones with a 3/8" drill bit. The clips slide onto the rocker trim first and then you can hold the trim in position and adjust the clips to match the holes. Once aligned, you can start from the back and press the trim firmly in place. They provide a solid hold that will prevent theft.
If removal is necessary then the plastic can be flexed with enough force and will give. Needle nose pliers can be used to remove the clip from the car (may destroy the clip).
Tools needed:
- 3/8" or 10mm drill bit for the mounting holes
- Drill (if holes are not already present)
Drill any holes needed about 31mm above the lowest part of the car. If holes are already present then reuse those.
Drill at least 6 holes evenly placed, but stop behind the door gap. No clips are needed under the quarter panel. The original Edsel included a butterfly clip under the quarter panel, but it's not needed for this.
Inspiration:
Mustang clips - https://www.clipsandfasteners.com/Ford-Rocker-Panel-and-Ground-Effects-Moulding-Clip-p/a20965.htm
Original Edsel clips - https://cgfordparts.com/ufolder/fordpart.php?number=2763
Compatible vehicles
- 1958 Edsel Edsel
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Rocker Trim Clip |
|---|---|
| Make | Edsel |
| Model | Edsel |
| Year | 1958 |
| Production | 3D printed to order (FDM) |
| Design files | 1 (STL) |
| Part number | CAT-99faddc4 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Edsel parts
Browse all Edsel replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-4.0.