S5 Aftermarket Grille Camera Mount Remix 1 – 2016 Audi A5 B9 (S5)

Replace a broken or missing s5 aftermarket grille camera mount remix 1 on your 2016 Audi A5 B9 (S5) with this 3D-printed part, produced to order by PartsRemade.

About this part

This is a 3D-printable front camera mount for an Audi A5/S5 (B9 chassis) for the RS-style grille sold by "German Car Accessories" in 2020. This is slightly based on the design shared by s5ecific on audiworld.com with some changes:
- Angled down further to match Audi original camera angle (20 degrees instead of 15).
- Camera moved forward and down to clear grille elements for 180 degree view.
- Optimized for 3D printing. See printing notes.
- Uses original Audi screws for mount, no additional hardware needed.
- Can be installed without screws or Sugru, but the Sugru method is still recommended.
- Open bottom for fitment and moisture draining.
- Reduced size of bottom so it can't be seen through grille.
- Increased size of mounting screw holes for compatibility.
- Added base bumper at bottom of model to rest against crash bar.

Printing/Installation Notes:
- This does require you to remove one horizontal member of the grille under the Audi logo.
- Model is designed to be 3D printed face down (camera pointed to the ground) for best visible surface finish, least support, and easiest to break off of support.
- Recommended to use the Sugru method described here: https://www.audiworld.com/forums/audi-a5-s5-rs5-coupe-cabrio-b9-220/a5-s5-rs5-style-grille-v2-%7C-camera-mount-3d-print-file-stl-2970520/#post25304994
- Use the original Audi mount screws to secure the camera in the mount.
- When installing the camera, it is snug but the camera lens frame should stick out about half millimeter (see photo).
- Mount base will rest against vehicle crash bar.
- This CAN be installed/removed without needing to take the bumper off, however it's a very tight fit, you will need to stretch the grille forward.

Compatible vehicles

• 2016 Audi A5 B9 (S5)

Always compare with your original part before ordering. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

How to order

This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.

More Audi parts

Browse all Audi replacement parts or search the full 3D-printed car parts catalogue.

Design credit: original design on Thingiverse, licensed CC BY-4.0.