Slide Out Ssd Mount – 2017-2026 Tesla Model 3
Slide Out Ssd Mount – 2017-2026 Tesla Model 3
3D-printed slide out ssd mount for the 2017-2026 Tesla Model 3, made to order as an affordable alternative to a discontinued or expensive original part.
About this part
This SSD holder was designed to be mounted on the underside of the hinged phone dock door near the USB ports. The parts are attached using double sided tape. Once installed, the SSD can easily be slid out in the event that you need to review video from a Sentry Mode event. Hopefully Elon will give us the ability to review footage from the screen inside the car but until that time, being able to quickly remove the drive just makes sense.
In order to make this fit, I selected a USB/SATA adapter with a fairly short SATA end. The exact one I used can be found [here](https://amzn.to/2ttS9TQ) on Amazon.
I printed mine with TPU but I might make it again using PETG. I chose TPU because it is soft and I figured it would be less likely to rattle and make noise but the fit was really snug so I don't think that would have been an issue.
Compatible vehicles
- 2017-2026 Tesla Model 3
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Slide Out Ssd Mount |
|---|---|
| Make | Tesla |
| Model | Model 3 |
| Year | 2017 |
| Production | 3D printed to order (FDM) |
| Design files | 2 (STL) |
| Part number | CAT-c7db5d39 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Tesla parts
Browse all Tesla replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-4.0.