Tonneau Cover Feet – 1990-2000 Bmw 3 Series E36 (Convertible/Cabrio)

Need a replacement tonneau cover feet for your 1990-2000 Bmw 3 Series E36 (Convertible/Cabrio)? This 3D-printed part is made to order to replace a broken, worn or missing original piece.

About this part

These are for the little feet underneath the tonneau cover of an BMW e36 convertible.

There are two files,
1). e36_tonneau_cover_feet_with_bottom, this is the entire thing, designed to be 100% 3D printed and just screwed into place on your car.
2). e36_tonneau_cover_feet_without_bottoms, this one is the same thing but the height is shorter by a few mm to allow you to glue a piece of rubber to the bottom of it like the factory ones have.

I personally run the one that is full length but in the future once I replace my soft top I will likely use the slightly shorter one and put a piece of rubber on the bottom of it so that the top does not get damaged.

I would also strongly advice you to use a material that is rated to withstand heat as the backside of these tonneau covers may get extremely hot in the sun. I personally used PETG since I am using my first test print of it, but in the future I will likely reprint with Nylon or ASA.

Compatible vehicles

• 1990-2000 Bmw 3 Series E36 (Convertible/Cabrio)

Always compare with your original part before ordering. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

How to order

This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.

More BMW parts

Browse all BMW replacement parts or search the full 3D-printed car parts catalogue.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.