{"product_id":"toyota-tacoma-power-bleeder-master-cylinder-adapters","title":"Toyota Tacoma Power Bleeder Master Cylinder Adapters","description":"\u003cp\u003eNeed a replacement toyota tacoma power bleeder master cylinder adapters for your Toyota Tacoma? This 3D model lets you print a replacement for a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis thing is a pair of adapters to connect your brake power bleeder to the master cylinder of your Tacoma and some other Toyotas. These master cylinders have a press on rubber cap and the universal adapter that comes with the pressure bleeder is a PITA to use. This is intended to use the power bleeder as an air source only. IOW, I don't transfer fluid from the bleeder to the vehicle. Rather I just pressurize the MC, bleed a brake, then refill the MC, do another, etc. Much neater that way. There are 2 adapters in the thing files. Both adapters use the same clamp that holds them onto the MC. The adapters seal via the O-ring so all this clamp does is keep the adapter from coming off. One adapter accepts a standard power bleeder cap made to fit Euro master cylinders with 45mmx3mm threads. Make sure to give the male adapter threads several layers of Teflon tape to get this thing to seal up. To refill the MC simply unscrew the power bleeder cap. The other adapter just has a nipple to connect your air tubing to. To refill the MC just unpin the clamp and lift the adapter off the MC. Other parts needed: Clamp 2 3mmx20mm screws A piece of light chain (I used a scrap of toilet flapper chain) 2 3mm nylon insert nuts (one for hinge, one for the screw used as the pin) 1 3mm washer for pin (you could do the pin other ways easily enough) Euro Cap Adapter 40mmx3mm Oring Teflon tape Air nipple adapter brass 1\/4 NPT x 1\/4\" barb fitting glue (I couldn't get this to seal with Teflon tape) 5\/16\" tubing, silicone or plastic Optional 5\/16\" acetal quick connects (makes it easy to disconnect and use the bleeder with other adapters on different vehicles) Oetiker clamps for the tubing Notes: Unfortunately, the adapters require supports to print. One issue I had with my Prusa is that it wanted to add supports to the 45mm threads, which are totally unnecessary. I dialed back the threshold for supports in the print settings to make those go away. You may or may not need to do this depending on your slicer. If you make the adapter with the threaded barb fitting you will probably have to chase the threads with a 1\/4\" NPT tap. I couldn't get those threads good enough. Or you could drill it out and use glue or epoxy. Mine needed glue to seal up anyway. On the version with the threaded barbed nipple some air seems to leak out of the top of the printed adapter though the structure of the print. You can play with your printer settings to try to eliminate that... or give the top of the part a coating of epoxy or whatever. The other one that accepts the Euro cap adapter doesn't leak air since no part of the print is exposed on top.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eToyota Tacoma\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before printing. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eToyota Tacoma Power Bleeder Master Cylinder Adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eMechanical\/Functional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eDigital download – STL file for FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiles included\u003c\/th\u003e\n\u003ctd\u003e3 (STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-P04892\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your vehicle details before you buy.\u003c\/p\u003e\u003ch2\u003eMore Toyota parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/toyota-parts\"\u003eToyota replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D printable car parts library\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design by Raymond Lopiccolo on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5794403\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed CC BY.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68042407706856,"sku":"CAT-P04892","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/1782708435_c3292112dd54_Tacoma_bleed_adapters.jpg?v=1793212011","url":"https:\/\/partsremade.com\/products\/toyota-tacoma-power-bleeder-master-cylinder-adapters","provider":"PartsRemade","version":"1.0","type":"link"}