Tweeter Pod – 2013-2022 Chevrolet Spark (EV)

Made a set of tweeter pods that fit 42mm JL tweeters and mount on the dash in my 2016 Chevy Spark EV. These should work in about any Spark.

The mounts angle the tweeters 45degrees to the middle and 15degrees up and are designed to aim the tweeter at the opposing headrest. The wires go through the hole in the middle and come out in between the tab. The tab is supposed to press into the slot between the dash and the A-pillar. I used a small piece of double-sided trim tape to hold the pod down to the dash and the tweeter into the pod.

The pods in the pic were printed in ABS and acetone vapor smoothed. Those in the pic are also earlier revisions with a smaller hole for the wires than the one in the file.

Designed in Inventor. The .ipt file is included if you want to change angles, hole sizes, etc. Only one file is included--just mirror it in your slicer for the other side.

Fits

• 2013-2022 Chevrolet Spark (EV)

Part details

• Make: Chevrolet
• Model: Spark
• Year: 2013
• Design files: 1
• Production: 3D printed to order

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

Catalogue item

This part is listed in our catalogue for reference. Want it made? Send us a request with your vehicle details.

Design credit: original design on Thingiverse, licensed CC BY-4.0.