{"product_id":"washer-bottle-relocation-kit-1999-2005-mazda-miata-na-nb","title":"Washer Bottle Relocation Kit – 1999-2005 Mazda Miata NA\/NB","description":"\u003cp\u003eNeed a replacement washer bottle relocation kit for your 1999-2005 Mazda Miata NA\/NB? This 3D-printed part is made to order to replace a broken, worn or missing original piece.\u003c\/p\u003e\u003ch2\u003eAbout this part\u003c\/h2\u003e\u003cp\u003eThis is a washer bottle relocation kit designed for the Mazda MX-5 \/ Miata NA and NB.\u003cbr\u003e\u003cbr\u003eI designed this tank to move the washer bottle to a cleaner position in the engine bay while keeping the installation simple. The kit uses an existing hole on the car for mounting, so no major modification is required.\u003cbr\u003e\u003cbr\u003ePrinting Recommendations\u003cbr\u003e\u003cbr\u003eI printed the main tank in PETG for better heat and chemical resistance compared to PLA.\u003cbr\u003e\u003cbr\u003eMy print settings:\u003cbr\u003e\u003cbr\u003eMaterial: PETG\u003cbr\u003eNozzle: 0.4 mm\u003cbr\u003eWall\/perimeter count: 8 walls\u003cbr\u003eTop layers: 8\u003cbr\u003eBottom layers: 8\u003cbr\u003eInfill: high \/ solid-style print recommended\u003cbr\u003e\u003cbr\u003eI used a high wall count and increased top\/bottom layers to make the part as solid and watertight as possible. For a fluid container, print quality and layer adhesion are very important.\u003cbr\u003e\u003cbr\u003eThe cap is designed to be printed in TPU. On my car, the TPU cap seals well and does not leak.\u003cbr\u003e\u003cbr\u003eNut Insert During Printing\u003cbr\u003e\u003cbr\u003eA standard nut is used inside the mounting point.\u003cbr\u003e\u003cbr\u003eYou need to pause the print in your slicer before the top of the nut pocket is closed. When the printer pauses, place a normal metal nut into the pocket, make sure it sits flat, and then continue the print.\u003cbr\u003e\u003cbr\u003eThe print will cover the nut and trap it inside the part. This creates a strong mounting point and prevents the screw from threading directly into plastic.\u003cbr\u003e\u003cbr\u003eRecommended steps:\u003cbr\u003e\u003cbr\u003eSlice the tank and check the layer preview.\u003cbr\u003eFind the layer where the nut pocket is open and ready for the nut.\u003cbr\u003eAdd a pause at that layer in your slicer.\u003cbr\u003eWhen the printer stops, insert a standard nut into the pocket.\u003cbr\u003eMake sure the nut is fully seated and not higher than the printed surface.\u003cbr\u003eResume the print.\u003cbr\u003e\u003cbr\u003eBe careful while placing the nut so you do not move the part on the print bed. Also make sure the nut is seated correctly, otherwise the nozzle may hit it after the print resumes.\u003cbr\u003e\u003cbr\u003eInstallation Notes\u003cbr\u003e\u003cbr\u003eThe tank mounts using an existing hole on the car. After installation, you can add foam tape or similar padding to the bottom\/contact area of the tank if you want to reduce possible vibration or noise. On my car it did not cause any annoying noise, but adding padding is a good optional improvement.\u003cbr\u003e\u003cbr\u003eThe washer pump stayed in place well on my setup. However, if you want extra security, I also included an optional pump holder. You can print it separately and glue it to the tank. It holds the washer pump very tightly.\u003cbr\u003e\u003cbr\u003eIncluded Files\u003cbr\u003eWasher bottle tank\u003cbr\u003eTPU cap\u003cbr\u003eWasher for the screw\u003cbr\u003eOptional washer pump holder\u003cbr\u003eSTEP file for modifications\u003cbr\u003e\u003cbr\u003eI am also sharing the STEP file, so feel free to modify, improve, or adapt the design for your own setup.\u003cbr\u003e\u003cbr\u003eRequired hardware:\u003cbr\u003e1 M6x10 screw\u003cbr\u003e1 M6 nut\u003c\/p\u003e\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1999-2005 Mazda Miata NA\/NB\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eAlways compare with your original part before ordering. Fitment can vary by trim level and production date.\u003c\/small\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003ctd\u003eWasher Bottle Relocation Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMiata\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003ctd\u003e1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduction\u003c\/th\u003e\n\u003ctd\u003e3D printed to order (FDM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign files\u003c\/th\u003e\n\u003ctd\u003e5 (STEP, STL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCAT-5bdb9cfb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePrint settings\u003c\/h2\u003e\u003cp\u003eStandard FDM printing settings:\u003cbr\u003e- Layer height: 0.2mm\u003cbr\u003e- Infill: 70%\u003cbr\u003e- Supports: As needed\u003c\/p\u003e\u003ch2\u003eHow to order\u003c\/h2\u003e\u003cp\u003eThis part is in our catalogue and is printed on request. \u003ca href=\"\/pages\/contact\"\u003eSend us a request\u003c\/a\u003e with your vehicle details and we will reply with a price and delivery time.\u003c\/p\u003e\u003ch2\u003eMore Mazda parts\u003c\/h2\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/mazda-parts\"\u003eMazda replacement parts\u003c\/a\u003e or search the full \u003ca href=\"\/collections\/parts-catalogue\"\u003e3D-printed car parts catalogue\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eDesign credit: original design on \u003ca href=\"https:\/\/www.thingiverse.com\/thing:7373651\" rel=\"nofollow\"\u003eThingiverse\u003c\/a\u003e, licensed \u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\" rel=\"nofollow\"\u003eCC BY-SA-4.0\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e","brand":"PartsRemade","offers":[{"title":"Default Title","offer_id":68035285876968,"sku":"CAT-5bdb9cfb","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/0252\/6952\/files\/washer-bottle-relocation-kit-1_1783511034031_qqqlry.jpg?v=1793178714","url":"https:\/\/partsremade.com\/products\/washer-bottle-relocation-kit-1999-2005-mazda-miata-na-nb","provider":"PartsRemade","version":"1.0","type":"link"}