Ac Condenser Pads – 1982-1994 Bmw 3 Series E30

Need a replacement ac condenser pads for your 1982-1994 Bmw 3 Series E30? This 3D model lets you print a replacement for a broken, worn or missing original piece.

About this part

Pads to support AC condenser for BMW E30 AC. These were designed for the condenser supplied by AC solutions though I believe this is the same as a standard E30 condenser. Example is printed in TPU 90A as it was available but it would likely benefit from being printed in 95A.

Bolt hole designed to fit M5 bolt. In testing a M5x20mm bolt was used with an M5 washer.

As my E30 did not come with air conditioning I used a M5 zinc rivnut to provide an appropriate mounting point.

I am certainly an amateur at both 3D modelling and printing so any feedback would be more than welcome. I have added a fillet to the side closest to the radiator as the car features the same but I believe it is too small to hugely matter when printing. My frame also appears to not be flat, I am unsure if this is a feature of all E30s so I chose not to design the part to cater for it. I believe in my case this is also exacerbated by the condenser seemingly being bowed in the opposite direction. Happy to adjust if it would help.

Compatible vehicles

• 1982-1994 Bmw 3 Series E30

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More BMW parts

Browse all BMW replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.