Door Vent Comb – 2005 Nissan 350z

3D printable door vent comb for the 2005 Nissan 350z: download the STL file and print an affordable replacement for a discontinued or expensive original part.

About this part

I recently bought a 2005 350 base coupe, and among the various bits that are expected to be messed up on an 18-year-old entry-level sports car was the passenger door vent. Removing it revealed that the comb which connects the three vanes was missing. I took out the driver's side vent for reference and made my own. I figure if mine was broken, someone else's likely is too so I should share.

You will need 3 m2 cap head screws to fasten this to the vent body. The original uses 3 little balls that seemed like a weak spot in the design, especially for printing it, so I went with this instead. I may add another file with the original style as well later on.

Compatible vehicles

• 2005 Nissan 350z

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Filament: </strong> Anycubic Standard Grey <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>This design should be fine to print on an FDM printer as well. It shouldn't matter but I would recommend using a higher-temp material like ABS since it will be in the heating system of the car.</p></div>

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Nissan parts

Browse all Nissan replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.