Honda/Acura NSX Switch Blank USB and Mic Housing - for Grom BT3 Unit

Need a replacement honda/acura nsx switch blank usb and mic housing - for grom bt3 unit for your Acura NSX? This 3D model lets you print a replacement for a broken, worn or missing original piece.

About this part

I installed a Grom BT3 into the stock Bose headunit of my '93 NSX - it comes with a cable that brings a mic for handsfree caling, and a USB socket to use as an external input, or for 5v charging. On the central switch plate, most cars will have a switch blank - this design replaces that, to give a more factory look. You can then mount the Grom unit behind the stero, just to the side by the glovebox, and route the cables back through the tunnel, and then into this switch. Requires the whole centre console to come out, but plenty of guides online on how to do that. It's designed to be tight, so take care and patience when fitting the USB especially. There is also a small bracing piece you can snap onto the rear just to give it a bit more strength and hopefully prevent the plug from ever moving. For best results, sand with a 2500+ paper to get it to look more OEM. Printed with PLA as I'm in the UK and it's never that hot - you might want to consider a material with a higher melt point however if you're in a hotter climate.

Compatible vehicles

• Acura NSX

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Acura parts

Browse all Acura replacement parts or search the full 3D printable car parts library.

Design credit: original design by Keith Mizen on Thingiverse, licensed CC BY.