Renault Clio mk3 Tweeter Vent

3D printable renault clio mk3 tweeter vent made for the Renault Clio: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.

About this part

Renault clio mk3 tweeter cover. I've added 2 sizes 61mm dia and 63mm dia. The one in the picture is 61mm and flush with the old vent. 63mm would be slightly wider and could make for a better fit. 1.just pop out your tweeter cover 2.sand the top of the tweeter cover and bottom of the 3d printed part so you get a good adhesion 3.use CA glue to stick the printed part on top of the tweeter cover (you might want to use clamps or something heavy to make sure it sticks) 4.At this point it would be a good idea if you would like to paint the cover as it will hide the glue marks. 5,wait to dry (if neccessary) and pop back into place in your car (make sure to be careful as it can snap/crack the vent). (you can also do this with the tweeter vent inplace but may make it difficult in the future to remove the tweeter and vent. it may also not create a sufficient bond.) Doing this modification is also permanent as there is no way of removing the cover in the future if you glue it on. Redstonepanda takes no responsibility for any damages or loses that may happen when you do this modification. DO THIS MODIFICATION AT YOUR OWN RISK. =.

Compatible vehicles

• Renault Clio

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Renault parts

Browse all Renault replacement parts or search the full 3D printable car parts library.

Design credit: original design by Jamie Thomas on Thingiverse.