Rim Blow Steering Wheel Insulator – 1969 Ford Mustang

Replace a broken or missing rim blow steering wheel insulator on your 1969 Ford Mustang with this 3D printable part from PartsRemade.

About this part

This is a replacement 1969 Ford Mustang Rim Blow Steering Wheel Insulator. It is a near exact duplicate of the original, which tends to shrink and crack over time.

There are 2 files available. An original reproduction and an improved (Thicker & Taller) model. Either will work, but the improved model just seems to fit better and should be less prone to breaking. Neither model includes the notches in the bottom of the ring, because I didn't actually see the use of those, except maybe it made it easier during assembly. In the few rings that I've seen, they always seem to crack right at the notch, where the height is narrower.

Not sure the settings matter much, but here's what I used:
0.1mm Profile
0.8 Wall Thickness
2 Wall Line Count
100 Infill
No supports needed
No Plate Adhesion needed

Compatible vehicles

• 1969 Ford Mustang

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Ford parts

Browse all Ford replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.