Vanagon Westfalia Replacement Fridge Air Vent with 12v Outlets – Volkswagen T3

3D printable vanagon westfalia replacement fridge air vent with 12v outlets made for the Volkswagen T3: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.

About this part

I designed this for my 1984 Volkswagen Vanagon Westfalia camper van. It allows me to mount two 12v outlets where the stock fridge vent goes, but without modifying the stock hardware. I'm not using my fridge on battery power, so I hijacked the 15 amp circuit. It is already tied to a relay that turns off power to it when the ignition switch is off. 12v outlets should be placed at the bottom. With a slight modification, this should work with outlets on top or on bottom, but on my van, the 12v socket is slightly too close to the edge and hits the wood of the cabinet. Screw holes may not line up exactly due to minor variations in hole spacing or screw alignment. NOTE: I had a tough time installing the left side 12v socket because of the stock fridge flue. A short socket for USB was all I could fit. FILES: 1.1 - both holes on the bottom. Fridge flue might get in the way. 1.2 - revised layout with both outlets on the right side to get around the fridge flue.

Compatible vehicles

• Volkswagen T3

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Volkswagen parts

Browse all Volkswagen replacement parts or search the full 3D printable car parts library.

Design credit: original design by Brad Dahlhofer on Thingiverse.