XJS Throttle/Accelerator Bushing (C34388) (Updated 10/2022) – Jaguar

3D printable xjs throttle/accelerator bushing (c34388) (updated 10/2022) for the Jaguar: download the STL file and print an affordable replacement for a discontinued or expensive original part.

About this part

This is a replacement Throttle/Accelerator Linkage bushing for the Jaguar XJS, but should also fit the XJ12. Tested this on my 88 XJS and it works beautifully. Print in TPU or similar flexible if at all possible. Included are two files for TPU: One is a bit thicker and longer than the other, but takes a bit more work to install, but works great if your mounting hole is slightly worn, like mine. The standard TPU file is easier to install and works great but there may be a little bit of play depending on your car. If you have to print in a solid material, I've included a file for PETG that seemed to work for a few months on my car. PETG is fuel/oil resistant and more heat resistant than PLA so that's my recommendation if you have to use it, or possibly ASA. Don't recommend it long-term but it's fine for a short-term fix. I recommend spraying some oil or lube onto the bushing and the linkage hole to make it easier to install, should just push in fairly easily after that.

Compatible vehicles

• Jaguar

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Jaguar parts

Browse all Jaguar replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY.