2 Dor Clip – 1995-2006 Dodge Stratus
2 Dor Clip – 1995-2006 Dodge Stratus
Need a replacement 2 dor clip for your 1995-2006 Dodge Stratus? This 3D model lets you print a replacement for a broken, worn or missing original piece.
About this part
In theory, a replacement for 6506853AA
Printed as two halves which then need to be glued together (I used dichloroethane).
Then, using a screwdriver drill and needle files, remove the print artifacts (the tail is specifically for this purpose) (the tail has a not-very-thick stem so you need to clamp it without strong vibrations, otherwise it will break off prematurely). After finishing, the tail can be snapped off.
The part turns out to be quite fragile and does not always survive removal from the door (though the original parts also suffer from this of course), so it is worth printing extras as spares.
Compatible vehicles
- 1995-2006 Dodge Stratus
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | 2 Dor Clip |
|---|---|
| Make | Dodge |
| Model | Stratus |
| Year | 1995 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-a24af86e |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Dodge parts
Browse all Dodge replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.