Center Console Cup Holder – 1983-1992 Volkswagen Golf MK2

3D printable replacement center console cup holder made for the 1983-1992 Volkswagen Golf MK2: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.

About this part

Cupholder to replace the ashtray in the center console. Uses the common audi A6/A4 retracting cupholder.
part number 4B0862534D


Printed in PETG, has held up nicely for the last year.


Side_Cover needs to be glued the faceplate by the cutout for the cig lighter. I suggest holding the faceplate in place on the center console and then glueing, aligning the side cover. Holder needs to be glued to the cupholder, the other parts attach with a couple of short M3 and M2 screws. Little bit of play in the Holder holes to allow for perfect alignment.


Smoothed the face plates with filler, then used wrinkle spray paint to get that "abs surface".


I did modify the audi cupholder so it closes a bit sooner when pushing it in, otherwise it will rub on the faceplate, but can't remember exactly what I did.


Cut a hole in the back of the ashtray slot, and used epoxy putty to fix the cupholder in place from the rear.


Feel free to modify, as I probably won't be updating the design, was a one-off for my car.

Compatible vehicles

• 1983-1992 Volkswagen Golf MK2

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Volkswagen parts

Browse all Volkswagen replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.