Cache-écrou de roue Chevy Aveo – Chevrolet Aveo

Besoin de remplacer : Cache-écrou de roue Chevy Aveo sur votre Chevrolet Aveo ? Ce modèle 3D (fichier STL) vous permet d'imprimer une pièce de rechange pour une pièce d'origine cassée, usée ou manquante.

À propos de cette pièce

Description originale du designer (en anglais) :

UPDATE 9.30.2021 - Upgraded to v1.1... Removed some mysterious voids in the original models which would weaken the printed objects and cause them to snap off at the nut end under normal torque (now that was a facepalm moment). Also, shortened the threaded end by a few mm because it was needlessly long. ORIGINAL NOTES: 9.29.2021 - These are wheel nut covers I designed for my Chevy Aveo after realizing a replacement set of 16 would cost a significant portion of the value of the car. Yeah, I'm mostly joking, but man those things are expensive! They're fully threaded and available in 4 flavors. I discovered after initial printing that a 19mm hex head, when printed on my Ender, was a bit too snug to fit a 19mm wrench comfortably - you could work it on there, but it was a pain... So I made an 18mm version which is quite a bit looser, but is close enough that a 19mm wrench can twist it off just fine. Also, two of my lug nuts have been replaced with a Dorman part which looks pretty similar to the originals (it's the gold one in the pics), but has a 2mm thread on the cover instead of the OEM thread of 1.5mm. All versions I've made are included in this Thing. The lug studs on my Aveo are 12 x 1.5mm, so if your Chevy's studs have the same threads and uses plastic covers for them, one of these (Dorman or OEM) should work fine for you. I suspect they'd actually fit on a bunch of vehicles with lug nut covers. However, because reality can be a PITA, YMMV. They were designed to be printed Hex side down with no support. I recommend any filament which can stand at least mildly elevated temps, due to their proximity to the brakes. My initial prototype run was printed in PETG and has held up fine over the summer, but I'm up near Canada so take that with a grain of salt if you live closer to tropical latitudes. BTW if you need modifications and have specific measurements for me, hit me up. No promises, but if I have the time I'll try to bang out new versions for your specific application and add them to this Thing. I seriously really can't believe how expensive these things are.

Véhicules compatibles

• Chevrolet Aveo

Comparez toujours avec votre pièce d'origine avant d'imprimer. La compatibilité peut varier selon la finition et la date de production.

Caractéristiques

Ce que vous recevez

Un modèle 3D numérique (fichier STL) de cette pièce, prêt à imprimer sur votre propre imprimante 3D, dans un atelier d'impression près de chez vous ou via un service d'impression en ligne. Il s'agit d'un téléchargement numérique : aucune pièce physique n'est expédiée. Vous n'êtes pas sûr de la compatibilité ? Contactez-nous avec les informations de votre véhicule avant d'acheter.

Plus de pièces Chevrolet

Voir toutes les pièces de rechange Chevrolet ou parcourir toute la bibliothèque de pièces auto imprimables en 3D.

Crédit design : design original par Lee Berry sur Thingiverse.