Levier de vitesse A200 personnalisé – Mercedes-Benz A 200

Besoin de remplacer : Levier de vitesse A200 personnalisé sur votre Mercedes-Benz A 200 ? Ce modèle 3D (fichier STL) vous permet d'imprimer une pièce de rechange pour une pièce d'origine cassée, usée ou manquante.

À propos de cette pièce

Description originale du designer (en anglais) :

Last year my brother purchased a 2006 Mercedes A200, as to be expected with a car of that age there were certain things that needed to be fixed. The original gear shifter was very worn and the leather was peeling off. Initially he purchased an aftermarket gear shifter but once installed it was found to not fit securely onto the gear stick. As we were in lockdown my brother asked if I could design and 3D print a gear shifter for his car and I, with my limited knowledge of Tinkercad, took on the project. After taking multiple measurements and doing rough sketches of the design I began trying to create it in Tinkercad. Having limited experience, even in Tinkercad, it took many tries, lots of coffee and plenty of head scratching in order to get the first prototype. From the first prototype I was able to try various designs and adjustments, each with their own benefits and pitfalls. After many prototype prints I reached the final design and with the help of my brother we set about installing it. Filament Used: CCTREE Sparkle Grey PLA Hello3D Silky Rainbow PLA Other Items: - 3D Printer. - Bolt and nut. - Washer. - Common tools. Note about the Liverpool Version: Liverpool Logo Designer - fraser0206 Thing: 3254108 Thingiverse Link Instructions: 1.Remove the shifter skirt: You should be able to unscrew the plastic connector and pull down the leather skirt. 2.Remove the shifter head: Remove the shifter head, make sure to carefully unhook any clips holding it to the gear stick. 3 Attach your 3D printed gear shifter: Insert the shifter head into the custom gear shifter so that the large holes line up. Slide in Bolt, washer and nut. 4.Assemble the gear shifter: Place the gear shifter back onto the stick, make sure that it clips into place properly, some force may be required. Review: The image showing the Silky Rainbow gear Shifter is the review print. As this project was completed in April 2020 I have had 8 months of feedback on the final design. This gear shifter has proven to be very durable even though it was printed in PLA. it has lasted hundreds of kilometers of driving as well as time in the sun. I hope you enjoyed reading about this project as much as I enjoyed designing and testing it. If you want to read about other projects we have done please check out the other posts on our blog Check out the full blog post for this print here

Véhicules compatibles

• Mercedes-Benz A 200

Comparez toujours avec votre pièce d'origine avant d'imprimer. La compatibilité peut varier selon la finition et la date de production.

Caractéristiques

Ce que vous recevez

Un modèle 3D numérique (fichier STL) de cette pièce, prêt à imprimer sur votre propre imprimante 3D, dans un atelier d'impression près de chez vous ou via un service d'impression en ligne. Il s'agit d'un téléchargement numérique : aucune pièce physique n'est expédiée. Vous n'êtes pas sûr de la compatibilité ? Contactez-nous avec les informations de votre véhicule avant d'acheter.

Plus de pièces Mercedes-Benz

Voir toutes les pièces de rechange Mercedes-Benz ou parcourir toute la bibliothèque de pièces auto imprimables en 3D.

Crédit design : design original par DIY Electronics sur Thingiverse, licence CC BY.