Headliner Clips Receivers – 1996-2013 Volvo C70
Headliner Clips Receivers – 1996-2013 Volvo C70
Replace a broken or missing headliner clips receivers on your 1996-2013 Volvo C70 with this 3D printable part from PartsRemade.
About this part
Both types needed (front and rear). Better print in ABS because the temperature of headliner.
Print as oriented without supports. 0.2 layer height could be fine. Infill 100%. Add borders for better bed add.
3 version: 1- As it is. 2- Includes 4 fins, two on each side, to improve printing stability that must be cut when printing is finished. 3- With clip included and a hole at the bottom in order to improve glue adherence (not tested). The last one perhaps could be used to fit the headliner with different clips using the lower hole.
You can find the clip make by pwoodwa1 here: https://www.thingiverse.com/thing:4968023
Compatible vehicles
- 1996-2013 Volvo C70
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Headliner Clips Receivers |
|---|---|
| Make | Volvo |
| Model | C70 |
| Year | 1996 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 6 (STL) |
| Part number | CAT-72086205 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Volvo parts
Browse all Volvo replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.