Support de téléphone + recharge sans fil Qi Lexus IS220/IS250/IS350 – universel

Besoin de remplacer : Support de téléphone + recharge sans fil Qi Lexus IS220/IS250/IS350 ? Ce modèle 3D (fichier STL) vous permet d'imprimer une pièce de rechange pour une pièce d'origine cassée, usée ou manquante.

À propos de cette pièce

Description originale du designer (en anglais) :

This is a dash phone holder with a built-in Qi charger for a Lexus IS220/IS250/IS350 . It's a springy compliant mechanism which clicks into your dash without damaging anything, and is easily removable with no traces! It's strong and supportive. I added a piece of transparent tape to the vent plastic where the mount rubs so it doesn't leave any scratches. The aim of the grille is compromised slightly up/down, but left/right is unaffected. It comes in 2 parts - the dash part and the phone part. The 2 parts either screw together with M3 screws, or glue together. The phone part is designed for a Xiaomi Mix 2S. The phone is 75mm wide and is a nice tight click-fit with a slight cut out for the on/off button. It's designed for slight flex with ABS (don't even think about PLA in a hot car!). If you need it for your phone, I'm happy to modify it if you throw me a tip:). Just measure the width, where your buttons are, and drop me a PM. If you want to use wireless charging, you'll need to do a bit of soldering. - The Qi charging module is this one from AliExpress: https://www.aliexpress.com/item/New-Qi-Fast-Wireless-Charger-PCBA-Circuit-Board-Transmitter-Module-Coil-Charging-High-Quality-Qi-Wireless/32951758605.html If you're buying this module, make sure it comes with the 9v input components (mine didn't!) - this will allow the full 10w fast charging. The wireless disc is secured with hot glue but would recommend epoxy if you're in a hot climate. You'll also need a step-down buck converter to take your 12v car voltage down to either 5v USB input, or 9v fast charging input depending on which you want. - I recommend this one as it has plenty of head room for fast charging (supports 30w without any additional cooling) https://www.aliexpress.com/item/Automatic-Step-Up-Down-DC-Power-Supply-AT30-Converter-Buck-Boost-Module-Replace-XL6009-4-30V/32952614571.html - I tested it with this 'weaker' LM2596 module, but it does get quite hot. It only officially supports 10w without external cooling: https://www.aliexpress.com/item/new-1pcs-lot-LM2596S-LM2596-LM2596-ADJ-DC-DC-Step-down-module-5V-12V-24V-adjustable/32828600888.html I haven't yet figured out where to take the 12v from, but I'm sure there's a nice beefy 12v supply behind the nav screen - I'll be doing this next and will update the pics when I find one.

Véhicules compatibles

• Universal fit – check the measurements against your vehicle

Comparez toujours avec votre pièce d'origine avant d'imprimer. La compatibilité peut varier selon la finition et la date de production.

Caractéristiques

Ce que vous recevez

Un modèle 3D numérique (fichier STL) de cette pièce, prêt à imprimer sur votre propre imprimante 3D, dans un atelier d'impression près de chez vous ou via un service d'impression en ligne. Il s'agit d'un téléchargement numérique : aucune pièce physique n'est expédiée. Vous n'êtes pas sûr de la compatibilité ? Contactez-nous avec les informations de votre véhicule avant d'acheter.

Crédit design : design original par Aivaras sur Thingiverse, licence CC BY.