M12 Shift Knob – Subaru WRX, Subaru Forester, Subaru Outback
M12 Shift Knob – Subaru WRX, Subaru Forester, Subaru Outback
3D printable m12 shift knob made for the Subaru WRX, Subaru Forester, Subaru Outback: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.
About this part
Designed to fit M12 threads. I used it on a Subaru Outback with an M12 x 1.25 thread. The hole is sized to properly fit a Subaru and the collar at the bottom will hold up a Subaru shift boot not sure how it would fit on other designs. The threads are extremely tight at first. I did this on purpose as I didn't want a loose fit. If you use some tri-flow or other lubricant to "tap" the threads it works pretty well. This is designed to be printed with support only around the boot retainer at the bottom. I found that setting Cura to a support angle of around 85 degrees would support the needed area around the base but wouldn't print anything inside.
Compatible vehicles
- Subaru WRX, Subaru Forester, Subaru Outback
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | M12 Shift Knob |
|---|---|
| Category | Other |
| Make | Subaru |
| Model | WRX, Forester, Outback |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-P05584 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Subaru parts
Browse all Subaru replacement parts or search the full 3D printable car parts library.
Design credit: original design by Jacob on Thingiverse, licensed CC BY 4.0.