Radio Knob Repair Part – 2012 Toyota Highlander
Radio Knob Repair Part – 2012 Toyota Highlander
Replace a broken or missing radio knob repair part on your 2012 Toyota Highlander with this 3D printable part from PartsRemade.
About this part
This repair part is designed for a 2nd gen Highlander where one of the radio knobs has been broken.
This was made specifically for a 2012 Highlander Limited. This could work for other Toyota models, not sure.
I made this repair part that goes over the shaft of the knob to hold it in place. This is all friction fit, no glue required. Of course you could glue it if you want, but it is not required.
Notice the four holes for allowing the LEDs on the base to be visible. When installing, the shaft needs to be lined up so that the little tabs go in the correct spots at the base of the shaft, and the LED windows should be lined up so that the LEDs can be seen.
Ideally, print in clear so the light from the LEDs does not get obstructed.
Compatible vehicles
- 2012 Toyota Highlander
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Radio Knob Repair Part |
|---|---|
| Make | Toyota |
| Model | Highlander |
| Year | 2012 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-589c4836 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Toyota parts
Browse all Toyota replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.