Saab Shelby Wheel Center Cap
Saab Shelby Wheel Center Cap
Replace a broken or missing saab shelby wheel center cap on your Saab with this 3D printable part from PartsRemade.
About this part
This cap is for Saab Shelby wheels and 99 Turbo Inca wheels. Note that PLA isn't going to hold up to summer heat, especially when painted black. The bore size is about 2.5 inches, but powder coat thickness can vary significantly in this area of the wheel. Print a test piece and figure out what scale value is required for a good fit on your wheels. The range should be 97% scale to 103% scale. Print with supports turned on, you only need them for the bottom-facing lip. The ceiling in the middle should bridge fine, so make sure you have 'support bridges' turned off. I used a support angle of 10 degrees in slic3r so I was only getting that lip supported. Note: You can print it either way up, depending on your preference. It is optimized for both print directions, but will require support in either direction.
Compatible vehicles
- Saab
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Saab Shelby Wheel Center Cap |
|---|---|
| Category | Other |
| Make | Saab |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-P05561 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Saab parts
Browse all Saab replacement parts or search the full 3D printable car parts library.
Design credit: original design by Quinn Morley on Thingiverse, licensed CC0.